EFTA00565259.pdf

From: Karyna Shuliak To: A Barrett -4 Cc: Andrew Loss° -4 Subject: Re: 8A and 8H Date: Tue, 18 Apr 2017 14:39:33 +0000 Hi Anthony, Jeffrey adviced to place a column differently, so please wait. Basically he wants exactly the same layout as on the picture, for the curtain rod as well. I will mark the new column location when I am back. Thank you. On Apr 18, 2017, at 10:08 AM, A Barrett < wrote: We have the photos of the marking you sent and will place the column on the same spot. Will hopefully get it done today. Send me specification of the rail you want to use. I assume that the curtain will only cover the length of the bed. There is no curtain running along the foot of the bed. see attachment below and add what you wish to it. On Apr 18, 2017, at 9:59 AM, Karyna Shuliak < > wrote: Hi Anthony, It is possible that Tess might have removed it. I will be back on Wednesday (tomorrow) and will mark it again. As for the curtain rod, the more seamless it is the better. I have attached the same photo with an idea, it looks like there is a thin white rod attached to the ceiling. Thank you. <Screen Shot 2017-03-18 at 8.38.11 AM.png> On Apr 17, 2017, at 10:32 PM, A Barrett < > wrote: Andrew told me that there was no marking for the column. It may have been removed? Anyway based on your photo I have an idea as to where you want it, but not sure if you require any specific dimensions. EFTA00565259  What type of curtain rod do you plan on installing and will it be run along the ceiling. Whatever information you have will make it easier for us to design this. Anthony Barrett On Apr 17, 2017, at 4:54 PM, Karyna Shuliak < • wrote: Hi Anthony, I did not know your phone number have changes, was sending you messages regarding apartments to the old one until I got a call from one of your relatives I guess, who told me. 2 things: I. Wanted to check on the progress with 8A with a column and discuss the curtain rod options. 2. 8H still has the mold issue remaining, I believe it needs a more serious repair, as there is an opening through the damaged wall. Last time one of the guys simply put a lot of insulation inside, but that did not help and the mold grows over it. I don't mind if we need to shut down that radiator completely and close that wall if that would help. Please advise. I have attached pictures of it below. Thank you! Karyna <imageLJPG> <image2.JPG> <2017 04 18 10 07 20.pdf> EFTA00565260