EFTA01107524.pdf

PLANE Aircraft PERFECT Interiors Inc. 1300 N Florida Mango Rd. Suite 32 West Palm Beach. FL 33409 Tel (561) 640-7900 Fax (561) 640-8018 Estimate # Dale 657 I 9/9/2013 Tail # N908.IE JEGE. Inc. Serial # 3800 Southern Blvd. Suite-104 West Palm Beach. FL 33406 20115 Descri • lion I Aircraft Carpet 48060.00 Optional Cabin Carpet Padding 5380.00 Single Seats Option 1 - 12 Single Seats with Existing Foam and Existing Design 94270.00 Option 2 - 12 Single Seats with New Foam and Existing Design 120860.00 Seat Belts - 12 Single Seat Belts 1680.00 Salon Triple Seating Option 1 - 2 Triple Seats with Existing Foam and Existing Design 28030.00 Option 2 - 2 Triple Seats with New Foam and Existing Design 39220.00 Seat Belts - 6 Salon Seat Belts 840.00 Fireblocking Test for Seat Leather and Foam 2550.00 Three Place Divan Option 1 - 2 Three Place Divans with Existing Foam and Existing Design 22230.00 Option 2 - 2 Three Place Divans with New Foam and Existing Design 32020.00 Seat Belts - 2 Three Place Seat Belts 1500.00 Lounge Three Place Curved Divan Option 1 - 1 Three Place Curved Divan with Existing Foam and Existing Design 15530.00 Option 2 - 1 Three Place Curved Divan with New Foam and Existing Design 21020.00 Seat Belts - Three Place Curved Divan 750.00 Lounge Four Place Curved Divan Option 1 - 1 Four Place Curved Divan with Existing Foam and Existing Design 18950.00 Option 1 - 1 Four Place Curved Divan with New Foam and Existing Design 25840.00 Seat Belts - Four Place Curved Divan 1000.00 Fireblocking Test for Divan Leather and Foam 2550.00 Forward Lavatory Seat Cushion and Shroud 3300.00 All Terms and Conditions on reverse and attached are agreed to and accepted. Signed: Title: Print: Date: EFTA01107524  O PLANE Aircraft PERFECT Interiors Inc. 1300 N Florida Mango Rd, Suite 32 West Palm Beach, FL 33409 Tel (561) 640-7900 Fax (561) 640-8018 Estimate Ka 657 9/9/2013 Customer N908.1E JEGE, Inc. 3800 Southern Blvd, Suite204 West Palm Beach, FL 33406 :0115 Aft Lavatory Seat Cushion and Shroud 3300.00 See Attached for Details The above item(s) will be completed according to the attached workscope/proposal. All Terms and Conditions on reverse and attached are agreed to and accepted. Signed: Title: Print: Date: EFTA01107525  PLANE PERFECT AIRCRAFT INTERIORS, INC. STANDARD TERMS AND CONDITIONS A) Maintenance Conditions 12) Unless specifically stated, all equipment and furnishings removed shall b.e.nu the Due to the unique variations in intenor configurations. labor for the removal and reinstallation property of Plane Perfect Aircraft Interiors. All components contained in the workscope shall of the cabin interior to facilitate maintenance installations ate not included unless gated remain property of Plane Perfect Aircraft Interiors until paid in full. otherwise. This will be invoiced separately on a time and material basis. Anydiscrepancies, 13) Unless speed-wally gated otherwise, this proposal is based on the aircraft being completed corrosion repair. or other maintenance found as a result of this work scope will be worked on a as a U.S. registered aircraft for FAA certification purposes. time and material basis. 14) Contract cancellation is subject to restocking/penalty charges. This includes charges for B) Avionics COlittitt011e fabricating stop order. 1I Current and Correct Aircraft wiring prints are required four (4) weeks prior to aircraft input. 15) Plane Perfect Aircraft Interiors reserves the right to request additional deposits, progress unless stared otherwise. payments and downtime for any additional work requested. 2) EMI/till interference problems that are pre-existing or are found because of a new 16) Itemized pricing is for cost analysis only. and is not intended as standalone pricing. unless equipment installation. wall be corrected on a TIME AND MATERIAL basis. otherwise noted. 3) Physical apace must be available in the aircraft for the quoted avionics equipment. 17) Customer supplied parts will be subject to a mandatory incoming inspection process before 4) Unless specifically stated otherwise. no provisions have been included in the pricing for the installation on the aircraft. The Customer will supply the proper paperwork. remitted by the relocation of any antennas, racks or equipment to facilitate the installation of new equipment. FAA for installation in aircraft with the part for the incoming inspection. A handling charge of Customer may be given turn pricing once Plane Perfect Aircraft Interiors is able to survey the 15% of the Litt Pricy of the part wall be invoiced to the Customer on the Work Order for parts aircraft. valued under $10.00. For parts valued over 31000. A handling charge of ION, will be 5) Earning aircraft system. and avionics equipment that are interfaced to newly installed applicable. Asa general rule. the value of the part will be determined by the aircraft avionics systems may require updating to current factory standards and mod status. If required. manufacturer's List Price for that transaction. If this price is not available. an estimate by Plane these modifications will be quoted once Plane Perfect Aircraft Intenors is able to survey the Perfect Aircraft Interior, Purchasing Manager will be used to determine the basis for the aircraft. handling charge. For spare parts supplied from Customer stock or earned on the aircraft (i.e.: 6) Pacing does not include any upgrades to the existing Hight Display System which may be spare generator. wheel. brake. converter. etc.). a mandatory incoming parts inspection will be required to support the VNAV. GPS scaling and the ability to doplay TAWS of ECM'S. conducted at a charge of $1(10 to cover that inspection. 7) Any additional modifications or repair, required to facilitate the modifications of the 18) All pricing is in US. Dollars. equipment noted. is NOT included in the pricing. 19) Plane Perfect Auendt Interiors shall not be considered in default and no liability is 8) At times. Plane Perfect Aircraft Interiors utilizes factory STCs to install new equipment. assumed by Plane Perfect Aircraft Interiors for any change in delivery schedule due to any Plane Perfect Aircraft Interiors verifies the sir package is complete with a Flight Manual cause not reasonably within the control of Plane Perfect Aircraft Interiors. including but not Supplement. Electrical and Structural drawings. Any deviations to the SIC will be corrected on limited to. foe, explosion. riots. acts of God. civil disturbances, stokes and labor difficulties. a TIME AND MATERIAL basis. delays in the delivery of vendor pats or equipment, delays by FAA and ACM? similar in nature 9) Plane Perfect Aircraft Intenoss will provide two sets of Avionics 1 Electrical Wiring Prints to the foregoing. Should an event occur which would give rise to Customer's claim that Plane to the Customer. Perfect Aircraft Interiors is in default hereunder. Customer shall first give Plane Perfect Aircraft C) Interior Modification Conditions Interiors a 30-day written notice of lb claim during which time Plane Perfect Aircraft Interiors I) The pricing or downtime of this proponal is based upon the materials selected by the may cure any claimed default and incur no liability therefore. Customer. Anychanges or deviations may result in a pnce adjustment and additional downtime. 20) Customer shall relieve Plane Perfect Aircraft Interiors, Inc. of all responsibility for all kiss 2) Plane Perfect Aircraft Interiors assumes the current oxygen supply and system is capable of or damage to said aircraft and articles left therein in the event of foe, theft or any other cause delivering the required How to any new configurations. beyond the direct control of Plane Perfect Aircraft interiors, Inc. 3) Seat cushion fire blocking certification is not included as part of this proposal. Fire blocking Payment Tenter certification shall be provided. based upon Customers final selection of seal fabrics and Payment in full. including any additional amounts associated with Discrepancies. Discrepancy materials. Fire blocking casts are as follows: Approvals or additional work. will be due maxi completion of the work and prior to release of a) 53.400 for each initial testing of one (1) seat covering material. aircraft, unless other prim arrangements have been established and approved. Acceptable b) .50l) for each additional covering matenal. method of payment: Company check. Progress payments will be established for projects in Example: All seats covered in leather will hare a onetime charge of $3. 400. If seats are excess of S250.0IX). Unless otherwise specified. a deposit of 50.I Percent Deposit is required to covered et leather and damn is coveredin cloth. then the charge will be 55.900. if she sears and start work. Deposits are non-refundable and will be retained by Plane Perfect Aircraft Interiors divan are coveredin any combination ofleather and cloth the charge shall be 55.9(0. JO liquidated damages in the event the project is canceled. 4) All new fabrics and materials not inherently flame resistant shall be treated with a lire Collections retardant protection as needed to comply with applicable FAA specifications. Plane Perfect Customer agrees to pay all reasonable attorney's fees, cost and expenses incurred by Plane Aircraft Interiors is required to ensure that all new materials are certified to nieet the Perfect Aircraft Interiors. Inc. in the enforcement of or an a consequence of any breach of this requirements of FAR 25.853 (FAR29.853 for helicopters). Agreement by Customer. Customer pants to Plane Perfect Aircraft Interiors a hen and security 5) This estimate is based upon a standard aircraft in a standard configuration. All modifications interest in Customer's Aircraft up to the amount Many payment due but not made by Customer are predicated on Plane Perfect Aircraft Interiors using unobstructed attachment points. hereunder. structural support. and existing DER approvable honeycomb construction, as well as existing Supplemental Billings main galley power lads for proper installation. Any unknown repairs or movement of existing Plane Perfect Aucrdt Interiors may be unable to secure limad vendor or internal pricing on secondary or prinixy structure necessary to execute proposed installations shall be at an certain pans or services at the time an invoice is required to pocess the payment. In those cases. additional cost. an estinuted mance will be provided for payment in (unlace above). After final prices are 6) When performing refinish work on existing woodwork. Plane Perfect Aircraft Interiors known. a final invoice will be provided as quickly as possible. and payment will by made. assumes woodwork to be in good condition. If upon stripping. It is found the existing wood Sales Tax veneer has concealed damage or cleaning solutions used that impact the finish effort, there shaft The State of Florida does not assess sales tax on parts and labor for airplanes that have a be additional charges to compensate for additional efforts. maximum weight over 15.000 lbs. and helicopters that have a maximum takeoff weight over 7) Hare Perfect Aircraft Interiors assumes the customer will remove their own personal effects. 10)300 lbs. Applicable tax will be charge for all other aircraft unless the proper documentation galley stores, distr.. clothing, tapes DVIX. CDs. etc. Plane Perfect Aircraft Interior, will i.e. tax exempt certificate or export documents are supplied to Plane Perfeth Aircraft Interiors. remove and inventory these item on a Time and Material basis if they have not been removed Inc with this executed agreement. prior to induction into the repair cycle. Environmental Regulating Charges Di General Terms & Conditions Environmental regulating charges may by applicable to cover costs incurred to comply with I) The customer is responsible for all expendable Items to complete the work scope outlined in local. Mate. Federal. and environmental regulations. the proposal and any additional item. Conditions of the Aircraft 2) The above prices are valid for 30 days from the dale of this proposal. The piing for the work is bared on the assumption that the aircraft is in airworthy condition, 31 Any work requested that is not part of this proposal will he performed at the then current that there is adequate apace and that the existing cleaned/avionics interfaces and electrical labor care. power will acconurodate the new installations and modifications. Nang also assumes that the 4) Downtime stated in this proposal is bused upon a timely availability and receipt of required existing aircraft wiring prints provided by the Customer match the current aircraft configuration materials. and that the existing structures will not have to be tested or modified in order to complete the 51 Unless specifically stated existing hardware will be utilised work. In the event one or mire of these assumptions is wrong. an estimate of the additional cost 6) Wort will be performed at Mina Beach International Airport. West Palm Beach. Florida and time required to correct the deficiency will be subnutted to the Customer for approval. unless other arrangements have been agreed upon. Discrepancy Approvals 7) All fuel, lubricants. and/or crew expenses required to comply with maintenance; to include Any Discrepancies found on the aircraft that are not put of the contracted work wove will be engine runs: and all flight costs are the responsibility of CLOW:Tier. documented and must be approved by the Customer before work can begin to correct that 8) All Inspections. Maintenance. Service Bulletins. and Installations are the responsibility of Discrepancy. Therefore. n is important that approvals are granted promptly and returned to the the customer. Plane Perfect Aircraft Interiors will provide pricing on a time and materials basis. Project Coordinator via Fax or Express Mail. It is also understood that any additional work may based upon information in current circulation, effective this date. Any subsequent releases are extend the downtime of the aircraft as well as increase the final invoice. For additional work subject to price changes due to changes in afarmtim contained in the Inspection programs. and correction of discrepancies found during the inspection. the current hourly labor rates at the Maintenance manuals. Installation manuals. and/or Service Bulletins. time of service shall be applicable. 91 All aircraft documentation (weight and balance. electrical loud analysis. Flight Manual Acceptance Supplements. 337's. etc.) are the responsibility of the customer. Additional charges will result. Upon acceptance of this agreement. this document and the attached proposal/work scope shall if new analysis is required. constitute the entire agreement between the parties and supersede all prior offers. negotiations 10) Aircraft MOMS prints must be complete and matt, the current aircraft configuration. and agreements relating to the subject Mittel hereof. Freight charges are the responsibility of CUthither. The signatory agrees to these Tenth and Conditions and any terms and conditions outlined in the attached documents. The signatory Certifies that he/she has the authority to execute this agreement on behalf of the aircraft owner. EFTA01107526  PLANE Aircraft PERFECT Interiors Inc. 2300 Al Florida.Mango- Rd, Suitt, 3.2 - We*' Pam, Sault; FL 33409 (561) 640-7900 Few (56.2) 640-8028 wwwtplanzperfeedaLreralteent, N908JE Boeing 727 09/05/13 Attention: This proposal is based on all seats and divans using leather with existing design. An additional option for new foam has been added to the proposal. Aircraft Carpet $48,060.00 All existing carpet will be removed throughout the aircraft (Cockpit and Air Stair Not Included). New customer selected carpet (Price not to exceed $125.00 per square yard) will be purchased by Plane Perfect Aircraft Interiors, Inc. The existing carpet will be used as a template to precut the new carpet to the existing interior configuration. The new carpet will be installed in the aircraft for final cut and fit. All exposed carpet edges will be surged to give a clean and finish appearance. New throw rugs will be provided for each seat location as existing. The existing interior components and seating removed to facilitate the installation of the carpet will be installed in the aircraft. The existing entryway and galley Loncoin flooring will be removed from the aircraft. Each piece of Loncoin flooring will be used as a template for new customer selected Loncoin (Price not to exceed $150.00 per yard). All floor areas throughout the aircraft will be inspected prior to the final installation of the new carpet. 8110-3 Burn Certificates will be supplied to the customer. All materials used will be in accordance with FAA regulations. OPTION: Cabin Carpet Padding $5,380.00 The existing aircraft carpet padding will be removed from aircraft and new Skandia, AeroLite carpet padding will be installed throughout the aircraft. 8110-3 Burn Certificates will be supplied to the customer. All materials used will be in accordance with FAA regulations. EFTA01107527 SINGLE SEATS OPTION ONE: 12 Single Seats With Existing Foam And Existing Design $94.270.00 The existing 12 single seats will be removed from the aircraft. The existing 12 single seats will be stripped of the existing covers. The existing foam, design and pattern (including stitching) will be retained as is. Each seat will be prepped for new customer selected leather (Price not to exceed $11.00 per square foot). New dress covers will be fabricated to match the existing seat design and pattern. All plating will be retained as is. 12 Single Seats Include: 6 Salon, 1 Lounge, 3 Office and 2 Bedroom All materials used will be in accordance with FAA regulations. SINGLE SEATS OPTION TWO: 12 Single Seats With New Foam And Existing Design $120,860.00 The existing 12 single seats will be removed from the aircraft. The existing 12 single seats will be stripped of the existing covers and foam. The density of foam will be selected per customer specifications. Once the density and the foam is selected by the customer, one seat will be built up for customer approval. Once approved by the customer, new foam cushions will be fabricated and upholstered using the new customer selected leather (Price not to exceed $11.00 per square foot). All plating will be retained as is. 12 Single Seats Include: 6 Salon, 1 Lounge, 3 Office and 2 Bedroom All materials used will be in accordance with FAA regulations. 12 Single Seat Belts $1,680.00 The existing 12 single seat belts will be removed from the seats. Each belt will be rewebbed to match new aircraft seat decor as approved by the customer. Plating is NOT included. 8110-3 Burn Certificates will be supplied to the customer. All materials used will be in accordance with FAA regulations. EFTA01107528 SALON TRIPLE SEATING OPTION ONE: 2 Triple Salon Seats With Existing Foam And Existing Design $28,030.00 The existing 2 triple SALON seats will be removed from the aircraft. The existing 2 triple SALON seats will be stripped of the existing covers. The existing foam, design and pattern (including stitching) will be retained as is. Each seat will be prepped for new customer selected leather (Price not to exceed $11.00 per square foot). New dress covers will be fabricated to match the existing seat design and pattern. All plating will be retained as is. All materials used will be in accordance with FAA regulations. SALON TRIPLE SEATING OPTION TWO: 2 Triple Salon Seats With New Foam And Existing Design $39,220.00 The existing 2 triple SALON seats will be removed from the aircraft. The existing 2 triple SALON seats will be stripped of the existing covers and foam. The density of foam will be selected per customer specifications. Once the density and the foam is selected by the customer, one seat will be built up for customer approval. Once approved by the customer, new foam cushions will be fabricated and upholstered using the new customer selected leather (Price not to exceed $11.00 per square foot). All plating will be retained as is. All materials used will be in accordance with FAA regulations. 6 SALON Seat Belts $840.00 The existing 12 single cabin seat belts will be removed from the aircraft. Each belt will be rewebbed to match new aircraft seat decor as approved by the customer. Plating is NOT included. 8110-3 Burn Certificates will be supplied to the customer. All materials used will be in accordance with FAA regulations. Fireblocking Test For Seat Leather And Foam $2,550.00 A fire blocking test is required at a charge from SKANDIA INC. of $1,700.00 plus the cost of 75 square feet of leather at a total of $825.00. The leather and a drawing of the exact foam work build-up for each seat will be sent to SKANDIA INC. for flammability testing. If OPTION ONE is chosen: Customer must supply original seat fireblocking package. If customer cannot supply Fireblocking package, OPTION TWO may need to be selectedfor proper seat documentation. Above fire blocking pricing is for one part number/style of leather. If a seat is upholstered with two colors of leather, the fire blocking pricing will change in accordance with leather selected. EFTA01107529 2 THREE PLACE DIVANS OPTION ONE: 2 Three Place Divans With Existing Foam And Existing Design $22,230.00 The existing 2 three place divans will be removed from the aircraft. The existing 2 three place divans will be stripped of the existing covers. The existing foam, design and pattern (including stitching) will be retained as is. Each divan will be prepped for new customer selected leather (Price not to exceed $11.00 per square foot). New dress covers will be fabricated to match the existing divan cushion design and pattern. The 3 place divan armrests will be stripped of all existing material and will be prepped for new customer selected leather. The divan frame will be stripped and prepped for new paint to match customer selected leather. All plating will be retained as is. 2 Three Place Divans Include: 1 Salon and 1 Office All materials used will be in accordance with FAA regulations. 2 THREE PLACE DIVANS OPTION TWO: 2 Three Place divans With New Foam And Existing Design $32,020.00 The existing 2 three place divans will be removed from the aircraft. The existing 2 three place divans will be stripped of the existing covers and foam. The density of foam will be selected per customer specifications. Once the density and the foam is selected by the customer, one set of divan cushions will be built up for customer approval. Once approved by the customer, new foam cushions will be fabricated and upholstered using the new customer selected leather (Price not to exceed $11.00 per square foot). The 3 place divan armrests will be stripped of all existing material and will be prepped for new foam and new customer selected leather. The divan frames will be stripped and prepped for new paint to match customer selected leather. All plating will be retained as is. 2 Three Place Divans Include: 1 Salon and 1 Office All materials used will be in accordance with FAA regulations. 2 Three Place Divan Seat Belts $1,500.00 The existing 2 three place divan seat belt assemblies will be removed from the aircraft. Each belt will be rewebbed to match new aircraft seat decor as approved by the customer. Plating is NOT included. 8110-3 Burn Certificates will be supplied to the customer. All materials used will be in accordance with FAA regulations. EFTA01107530 LOUNGE 3 PLACE CURVED DIVAN OPTION ONE: 1 Three Place Curved Divan With Existing Foam And Existing Design $15.530.00 The existing 1 three place curved divan will be removed from the aircraft. The existing three place curved divan cushions will be stripped of existing covers. The existing foam and design will remain. Each cushion will be prepped for new customer selected leather (Price not to exceed $11.00 per square foot). The existing cushion upholstery design and pattern (including stitching) will be retained as is. The 3 place curved divan armrests will be stripped of all existing material and will be prepped for new customer selected leather. The divan frame will be stripped and prepped for new paint to match customer selected leather. All plating will be retained as is. All materials used will be in accordance with FM regulations. LOUNGE 3 PLACE CURVED DIVAN OPTION TWO: 1 Three Place Curved Divan With New Foam And Existing Design $21,020.00 The existing 1 three place curved divan will be removed from the aircraft. The existing three place curved divan cushions will be stripped of existing covers. New foam cushions will be fabricated with customer selected density. One set of divan cushions will be built up for customer approval. Once approved by customer, the foam production will begin on all divan cushions and will then be reupholstered using new customer selected leather (Price not to exceed $11.00 per square foot). The 3 place curved divan armrests will be stripped of all existing material and will be prepped for new foam and new customer selected leather. The divan frames will be stripped and prepped for new paint to match customer selected leather. All plating will be retained as is. All materials used will be in accordance with FM regulations. Lounge Three Place Curved Divan Seat Belts $750.00 The existing Lounge three place curved divan seat belt assemblies will be removed from the aircraft. Each belt will be rewebbed to match new aircraft seat decor as approved by the customer. Plating is NOT included. 8110-3 Burn Certificates will be supplied to the customer. All materials used will be in accordance with FM regulations. EFTA01107531 LOUNGE 4 PLACE CURVED DIVAN OPTION ONE: Four Place Curved Divan With Existing Foam And Existing Design $18,950.00 The existing four place curved divan will be removed from the aircraft. The existing three place curved divan cushions will be stripped of existing covers. The existing foam and design will remain. Each cushion will be prepped for new customer selected leather (Price not to exceed $11.00 per square foot). The existing cushion upholstery design and pattern (including stitching) will be retained as is. The 4 place curved divan armrests will be stripped of all existing material and will be prepped for new customer selected leather. The divan frame will be stripped and prepped for new paint to match customer selected leather. All plating will be retained as is. All materials used will be in accordance with FAA regulations. LOUNGE 4 PLACE CURVED DIVAN OPTION TWO: Four Place Curved Divan With New Foam And Existing Design $25,840.00 The existing four place curved divan will be removed from the aircraft. The existing three place curved divan cushions will be stripped of existing covers. New foam cushions will be fabricated with customer selected density. One set of divan cushions will be built up for customer approval. Once approved by customer, the foam production will begin on all divan cushions and will then be reupholstered using new customer selected leather (Price not to exceed $11.00 per square foot). The 4 place curved divan armrests will be stripped of all existing material and will be prepped for new foam and new customer selected leather. The divan frames will be stripped and prepped for new paint to match customer selected leather. All plating will be retained as is. All materials used will be in accordance with FAA regulations. Lounge Four Place Curved Divan Seat Belts $1,000.00 The existing Lounge four place curved divan seat belt assemblies will be removed from the aircraft. Each belt will be rewebbed to match new aircraft seat decor as approved by the customer. Plating is NOT included. 8110-3 Burn Certificates will be supplied to the customer. All materials used will be in accordance with FAA regulations. EFTA01107532 Fireblocking Test For Divan Leather And Foam $2,550.00 A fire blocking test is required at a charge from SKANDIA INC. of $1,700.00 plus the cost of 75 square feet of leather at a total of $825.00. The leather and a drawing of the exact foam work build-up for each divan will be sent to SKANDIA INC. for flammability testing. If OPTION ONE is chosen: Customer must supply original seat fireblocking package. If customer cannot supply Fireblocking package, OPTION TWO may need to be selectedfor proper seat documentation. Above fire blocking pricing is for one part number/style of leather. If a seat is upholstered with two colors of leather, the fire blocking pricing will change in accordance with leather selected. Fwd Lavatory Seat Cushion And Shroud $3.300.00 The existing fwd lavatory/potty seat and shroud will be removed from the aircraft. The existing fwd lavatory/potty seat and shroud will be stripped of the existing leather and foam. The existing fwd lavatory seat cushion will be reupholstered with new customer selected leather. All materials used will be in accordance with FM regulations. Aft Lavatory Seat Cushion And Shroud $3,300.00 The existing aft lavatory/potty seat and shroud will be removed from the aircraft. The existing aft lavatory/potty seat and shroud will be stripped of the existing leather and foam. The existing aft lavatory seat cushion will be reupholstered with new customer selected leather. 8110-3 Burn Certificates will be supplied to the customer. All materials used will be in accordance with FM regulations. EFTA01107533 Notes Any and all miscellaneous discrepancies found while performing the workscope will be brought to the customer's attention before any additional work or billing is completed. There will be no additional billing to the customer unless an authorized work request has been approved by the customer. In the event the customer selects a carpet and/or leather exceeding the square yard limit established, the customer is responsible for the additional cost of the carpet square yard price and/or the leather square foot price. This amount will be added to the amount of the estimate provided. The following items are not included in the above workscope or pricing supplied to the customer, but can be performed by Plane Perfect Aircraft Interiors, Inc. upon the request of the customer: Plating Weight and Balance of Aircraft. Log Book Entries — This will be the responsibility of the customer. EFTA01107534