EFTA00797603.pdf

A ALOFT AeroArchitects QUOTE Date: 10/03/17 Quote Number: 20171003DLC001 Customer: Wentworth Aero, LLC Aircraft Type: 6737-800 Point of Contact: Wendy Bierwirth Aircraft Number: YD405 Telephone: Aircraft S/N: 32806 E-mail: Aircraft Reg: VP-CBB A. Program Price Cost Item Products and/or Service Description Unit Price Line Total Type ALOFT Auxiliary Fuel System Reconfiguration Modification Instructions and Kit FROM: 2 FWD/3 AFT tank configuration TO: 2 FWD/5 AFT tank configuration Deliverable: Service Bulletin Modification Kit including all supporting documentation and parts required for 1 FFP 5175,000.00 $175,000.00 the conversion of the subject aircraft. Part Number: TBD Additional fuel tanks required are priced separately as Item 2 below. Special Notes: 1. Installs 2 Ea. Full Size AFT Slave Tanks PATS Auxiliary Fuel Tank #6 — Full Size AFT Slave Tanks 2 Qty: 2 Ea. FFP $347,000.00 $694,000.00 Part Number: 42412-201 Condition: New Customer Approval Quote 20171003DLC001 21652 Nanticoke Avenue Georgetown, DE 19947 aloftaeroarchitects.com Proprietary and confidential EFTA00797603 ALOFTA . .ero.Ascitects Page 2 of 4 Mandatory Structural Modification SB — 5 AFT 3 FFP $45,121.00 $45,121.00 Part Number: ST01384NY-53-SB-018 Flammability and BBSU Cargo Compartment 4 Closeout SB — 5 AFT FFP $14,144.00 $14,144.00 Part Number: ST01384NY-53-SB-023 Optional Product Improvement SB Metal-In-Metal Service Bulletin Kit 5 FFP $127,500.00 $127,500.00 AFS Fuel System Fill and Vent Lines Part Number: ST01384NY-D-28-SB-013 Optional Product Improvement SB AFS Interconnect Gland Service Bulletin 6 FFP $14,405.00 $14,405.00 2F/5A Tank Configuration Part Number: ST01384NY-D-28-SB-015 Onsite Modification Support If requested by Customer, a separate ALOFT Customer Service Agreement (CSA) will be provided to the 7 Customer for Approval which details ALOFT Terms, CSA TBD TBD Conditions and Charges for providing Onsite Services such as Technicians to perform or assist with AFS Installation, Technical Support or Engineering Services. Total Material Quotation - $ USD 1. 2 FWD/5 AFT Service Bulletin Modification Kit, 2 Ea. #6 AFS Fuel Tanks, $928,265.00 Mandatory Structural SB and Flammability Closeout SB. 2. Optional Product Improvement Service Bulletins — MIM & Glands. $141,905.00 B. Program Schedule ALOFT's standard lead time is 32 weeks ARO for auxiliary fuel tanks and 90 to 120 days ARO for delivery of the Modification Kit and documentation. Depending upon the timing of the order ALOFT may be able to provide tanks on an expedited basis. C. Proposal Notes and Assumptions 1. The Installation Kit will include all parts required for the modification except for locally procurable consumables, hardware and/or items which may be shown on the modification work instructions or installation drawings as "fabricated onsite" or "Customer Supplied" materials. 2. Documentation and associated kits will be to the latest revision at the time of PO. Customer Approval Quote 20171003DLC001 21652 Nanticoke Avenue Georgetown, DE 19947 aloftaeroarchitects.com Proprietary and confidential EFTA00797604 ALOFTA . .erascitects A Page 3 of 4 3. Unless otherwise noted above, Labor for the installation of the SB Modification Kit is not included in the price provided and shall be accomplished by the Customer. 4. The Customers selected maintenance repair organization (MRO) must be authorized to approve altered products for return to service in accordance with 14 CFR part 43 and have FAA accepted Repair Station and Quality Control Manuals providing aircraft return to service procedures. For CAA certified facilities authorized to perform the alteration and approve the altered product for return to service. The facility must be located in a country with a Category 1 rating under the International Aviation Safety Assessment (IASA) program with no limitations or remedial work plan and have a bilateral agreement with the U.S. which includes design approval processes for products. 5. Design Compatibility with Previous Installed Modifications The Customer and/or the Customer's selected installation facility/maintenance repair organization must determine if this design is compatible with previously installed modifications. As ALOFT Aux Fuel System Modifications are based upon a "Green" aircraft configuration only, it is the responsibility of the installer and/or owner/operator to review ALL STCs and modifications installed on the aircraft for compatibility. The installer and/or owner/operator must ensure that all documents are reviewed and updated including, but not limited to: (a) Rapid Decompression Analysis (b) Weight and Balance Manual Supplement (c) Cargo (FWD and AFT) Zone and Floor Loading (d) Cabin Floor Loading This proposal does not include the cost to perform any analysis on previously installed aircraft or equipment modifications. 6. The Customer is responsible for notifying their Civil Aviation Authority ("GCAA") of their intention to perform these modifications on their aircraft. 7. Applicable if installation services are not performed at ALOFT: Should a Facilities Audit, Conformity Inspections and/or ALOFT onsite Technical Assistance be required or requested to support and complete these modifications, a separate ALOFT Customer Service Agreement (CSA) will be provided to the Customer for Approval which details ALOFT Terms, Conditions and Charges for providing these onsite Services. 8. Purchase Orders should be sent electronically to the undersigned. D. Terms and Conditions 1. Payment Terms: 50% deposit for the modification kit, tanks and service bulletin package. Balance due prior to shipment of deliverables. Installation labor payment terms include 50% upon aircraft arrival and prior to work commencement and the total balance due upon completion of services and prior to aircraft departure. Customer Approval Quote 20171003DLC001 21652 Nanticoke Avenue Georgetown, DE 19947 T 302.855.5888 F 302.855.9196 aloftaeroarchitects.com Proprietary and confidential EFTA00797605 ALOFT AeroArchitects Page 4 of 4 2. Validity Period: This quotation is valid for 30 days from date of quotation. 3. Quotation Basis: THIS QUOTATION IS BASED ON ALOFT'S EXPERIENCE. THIS QUOTATION IS PROVIDED UNDER THE ASSUMPTION THE SUBJECT AIRCRAFT IS IN AN AIRWORTHY CONDITION AND IN A STANDARD MANUFACTURER'S CONFIGURATION. IF UPON INSPECTION OF THE AIRCRAFT, OR WHEN INSTALLATION ACTIVITIES ARE UNDERWAY IT IS DETERMINED THAT ADDITIONAL WORK OR PARTS ARE REQUIRED DUE TO THE AIRCRAFT BEING NON-AIRWORTHY, NON-STANDARD OR OTHERWISE MODIFIED FROM ITS FACTORY CONDITION ALOFT RESERVES THE RIGHT TO ADJUST THE PRICE TO REFLECT ANY ADDITIONAL WORK REQUIRED BY ALOFT. 4. Method of Payment: All funds shall be wire transferred to: Wire Transfer Instructions - Domestic ACH Transfer Instructions Beneficiary Name: ALOFT AeroArchitects Beneficiary Name: ALOFT AeroArchitects Account Number: Account Number: Bank Name: PNC Bank N.A. Bank Name: PNC Bank N.A. City & State: East Brunswick, NJ City & State: East Brunswick, NJ ABA routing #: ABA routing #: Wire Transfer Instructions — International Beneficiary Name: ALOFT AeroArchitects Account Number: Bank Name: PNC Bank N.A. City & State: East Brunswick, NJ SWIFT Code: E. Prepared By Duncan Clark F. Proposal Acceptance Customer Acceptance: Date: Purchase Order: Customer Approval Quote 20171003DLC001 21652 Nanticoke Avenue Georgetown, DE19947 aloftaeroarchitects.com Proprietary and confidential EFTA00797606