EFTA01147503.pdf

REQUEST FOR BIDS CYPRESS, INC. PRODUCTION WELL (6-INCH CASING) The bidder hereby proposes to furnish all equipment, material and labor, and to do all the work required to complete the work in accordance with specifications for the unit prices, lump sum, or hourly rates set forth below and in the attachments. If needed, attach additional pages to provide further detail on bid items. Item Estimated Quantity Units Unit Price Total Price 1 Mobilization, Demobilization and Clean-Up 1 Each 5 500.00 5,500.00 2 Install Cemented Surface Casing to Minimum 40 Foot Depth 1 Each 4900.00 4 900 00 3 Drill Minimum 10 Winch 800 Feet Hole nal 99 Ann nn 4 Furnish and Install 6- inch Inside Diameter Blank PVC Casing 400 Feet 16.00 6.400.00 5 Furnish and install 6- Inch Inside Diameter PVC Screen 400 Feet 20.00 8.000 00 6 Furnish and Install Pitless Adapter 1 Each 4.650.00 4,650.00 7 Furnish and Install Formation Stabilizer Each 11.950.00 11,950.00 8 Furnish and Install Annular Seals and Backfill 1 Each 4,500.00 4.500 00 9 Well Development 16 Hours 400 00 6 400.00 10 Well Testing Flours 210.00 5,040.00 11 Wellhead Seal and Protection 1 Each 815.00 815.00 12 Stand-By Time 8 Hours 250.00 2.000.00 ***I3 Furnish and Install Permanent Pump and Controls 1 Each 21.246.00 21,246.00 —120 HP/100 GPM pump set © 504' on 2.5" galv. drop pipe w/control panel Total 110,996.00 IlydroGeologic Services, Inc. CYDNOIIAOkiSlabUOIS.LivoltmilltWelielareit 4 1St NM License No. WD-I472 EFTA01147503  REQUEST FOR BIDS CYPRESS, INC. PRODUCTION WELL (6-INCH CASING) Supplemental Information Date when rig and crew are available to commence work Negotiable Estimated time required to complete work: 30 days. New Mexico Office of the State Engineer Water Well Driller's License No: WD-1472 Please attach a list and description of equipment for proposed work and description of proposed drilling and construction methods and specifications, including: borehole drilling method, casing cementing method, well development method, surface casing material specification, blank casing and screen material specification, slot size, and formation stabilizer material. Indicate test pump size and capacity, and permanent pump size, capacity, appurtenances and controls. C %Propt,, CliwOlotAlt I 2%Lrairci• WAVE\raa b>M EFTA01147504  REQUEST FOR BIDS CYPRESS, INC. PRODUCTION WELL (OPTIONAL ALTERNATIVE 8-INCH CASING) The bidder hereby proposes to furnish all equipment, material and labor, and to do all the work required to complete the work in accordance with specifications for the unit prices, lump sum, or hourly rates set forth below and in the attachments. If needed, attach additional pages to provide further detail on bid items. Item Estimated Quantity Units Unit Price Total ('rice 1 Mobilization, Demobilization and Clean-Up I Each 5,500.00 5.500.00 2 Install Cemented Surface Casing to Minimum 40 Foot Depth 1 Each 5 500 00 5 500 00 3 Drill Minimum 12 4 3 / -inch 800 Feet I tole 39.00 31.200.00 4 Furnish and Install 8-inch Inside Diameter Blank PVC Casing 400 Feet 24 00 9 600 00 5 Furnish and Install 8-Inch Inside Diameter PVC Screen 400 Feet 28.00 11 200.00 6 Furnish and Install Pitless Adapter 1 Each 6,695.00 6,695.00 7 Furnish and Install Formation Stabilizer 1 Each 13.950.00 13.950.00 8 Furnish and Install Annular Seals and Backfill 1 Each 4.675 00 4,675.00 9 Well Development 16 Hours 400.00 6.400.00 10 Well Testing 24 Hours 210.00 5.040.00 11 Wellhead Seal and Protection 1 Each 815.00 815.00 12 Stand-By Time 8 Hours 250.00 2,000.00 13 Furnish and Install Permanent Pump and Controls I Each 21.246,00 21.246.00 Total 123.816.00 *VirinetAaslinenoiluerreitretwaidiveit rot bask EFTA01147505  REQUEST FOR BIDS CYPRESS, INC. PRODUCTION WELL (OPTIONAL ALTERNATIVE 8-INCH CASING) Supplemental Information Date when rig and crew are available to commence work Negotiable Estimated time required to complete work 30 days. New Mexico Office of the State Engineer Water Well Driller's License No: WD-1472 Please attach a list and description of equipment for proposed work and description of proposed drilling and construction methods and specifications, including: borehole drilling method, casing cementing method, well development method, surface casing material specification, blank casing and screen material specification, slot size, and formation stabilizer material. Indicate test pump size and capacity, and permanent pump size, capacity, appurtenances and controls. C'U.,*<t• \ awake 201naTOR•NA Wia‘skr\ng '0, EFTA01147506