EFTA02714524
EFTA02714528 DataSet-11
EFTA02714543

EFTA02714528.pdf

DataSet-11 15 pages 3,649 words document
P17 P18 P19 V11 V16
Open PDF directly ↗ View extracted text
👁 1 💬 0
📄 Extracted Text (3,649 words)
Offer Pre Buy Inspection + A2 Check offered by Lufthansa Technik AG to Freestream for BBJ, Serial Number 29273 Issue Date: 01 April 2015 / 09 April 2015 Offer Rev.: 01 Offer No.: WY-2015-04-02 Contact: Seethe Hauck Phone: • 49 40 5070 2882 Mobile: + 49 151 589 15723 Fes: + 49 40 5070 982882 Email: sescha.hauckWhidlh.de CONFIDENTIAL NOTICE• The contents of this message. Including any attachment..:. are confidential and may be legally privileged. If you are not the addressee indicated in this M63SEKW (or responsINo for the delivery of the message to such person), you may nol cony. dicclose or deliver this message or any pad of it to anyone, it any form. In such case, you should delete this message and kindly notify the sender by reply e-mail. Opinions, conclusions and other Informal/on in this message that does not relate to the official business of Luftheass Team& shall be understood as neither givsn nor endorsed by it. EFTA_R1_02140615 EFTA02714528 C-e) hifth3nsa Technik Introduction Together with its subsidiaries and joint ventures, Lufthansa Technik is the world's largest provider of technical support services for aircraft. The company maintains a network of strategic locations that make it possible to provide aircraft operators in all market regions with a complete range of services. from maintenance and overhaul to special inspections, from developmental work to complete solutions, including logistics. Currently, over 500 international operators worldwide rely on our excellent technical competence even for the most complicated problems. Confidentiality and Licence Grant Freestream shall treat as strictly confidential any information pertaining to this Proposal, including the document itself as well as individual provisions contained therein ("Confidential Information"). Confidential Information shall include but not be limited to the contents of the negotiations leading up to this Proposal, any business, technical and strategic data disclosed by Lufthansa Technik or its Subcontractors, the price for the Services and the design. Freestream shall not disclose any Confidential Information to any third party or employee, except where such disclosure is necessary in order to fulfil the obligations relating to this Proposal and Freestream shall ensure that the employee or third party in turn is bound by the same confidentiality obligations and limitation of use as Freestream. Any Party receiving Confidential Information from Freestream in connection with this Proposal ("Beneficiary) shall not be bound by the confidentiality obligations under this Article if the Beneficiary can prove that the Confidential Information was already known to him at the date he received said information; - was already known to the public prior to the date the beneficiary received said information; has become known to the public after the date the beneficiary received said information, except if the Beneficiary is the originator of the publication of said information; - has been communicated to him at any date by a third party with the right to communicate it. If this Proposal is accepted by Freestream, the obligation with regard to confidentiality and limitation of use shall extent to the documentation and other data as well as any other information provided by Lufthansa Technik under such agreement. All obligations of confidentiality imposed under this Article shall survive the expiry of this Proposal, completion of the project or a termination of an agreement entered into between the parties. Page 2 of 12. Offer Pre Buy Inspection WY-2015-04-02, Rev.00 —01 Apra 2015 EFTA_R1_02140616 EFTA02714529 Ce.) Lufthansa rechnik Contents 1 AIRCRAFT ASSESSMENT 4 2 SCOPE OF SERVICE 4 3 CHARGES 6 4 SCHEDULE 8 5 GENERAL CONDITIONS 9 6 LEGAL 9 7 PAYMENT TERMS 9 8 VALIDITY 10 ANNEX A 11 ANNEX B 12 Page 3 of 12, Offer Pre Buy Impaction WY-2015-04-02, Rev.00 - 01 April 2015 EFTA_R1_02140617 EFTA02714530 0- Lufthansa Technik 1 Aircraft Assessment This Proposal Is based on Freestream request referring to Mr. Ittihadieh's e-mails dated March 3151, 2015, and April 2n°, 2015, to perform a Pre Buy Inspection and a 2A-check on Boeing Business Jet with registration VP-BBJ (hereafter also called °the Aircraft"). 2 Scope of Service 2.1 Pre Buy Inspection LUFTHANSA TECHNIK shall provide 3 engineers highly qualified in avionic, systems and structure to assess the Aircraft at Lufthansa Technik's facility in Hamburg in regard to provide documentation and actual physical condition. LUFTHANSA TECHNIK shall afterwards provide a report as indicated in Annex A. Inspection of Aircraft Documentation (pre Inspection and on-Site Check) General Inspection • Upcoming Maintenance Checks (incl. Airframe, Engines, LDG) • Engines and LDG Information (Overhaul Reporting) • Pictures and older Review-Reports - if applicable • LOPA and Crew & Passenger Data • Last Certificate of Airworthiness (CofA) • AD Status of Engine/Airframe • Existence of Maintenance Program Detailed Inspection • Inspection of current approved Maintenance Program (AMP} • Open-Item List / Deferred Maintenance • Last Performed- and next due Maintenance List • Dent & Buckle chart • List of repairs • Aircraft Incident- and Accident Reports • SB and AD Status, Review of Implementation / Dirty Finger Prints (OFF) for AD-Notes • Current Life Time Remaining Status List for Engines (last Shop Visit, Trend Monitoring) • APU Shop Visit Reports • NLG and MLG Shop Visit Reports / LDG Log Book • Check of Manual Revision Status (AOM, AMM, IPC) Physical Inspection of Aircraft on-Site • General Visual Inspection (GVI) of ME, Cabin and Cargo Compartments • GVI of Aircraft outside, Engine and Structure Inspection (opening of quick access panels) • Functional Checks of Hydraulic, Fuel-Sys, Air-Con, APU, Lights, Fire Ext. Sys, EIS • P/N read out — spot checks only • Spot Checks Page 4 of 12, Offer Pre Buy Inspection WY-2015-04-0Z Rev.00 - 01 April 2015 EFTA_R1_02140618 EFTA02714531 S Lufthansa Technik Borescopinq Inclusions • All on-site personnel (labour hours) and all other labour (e.g. engineering, logistics) • Certifying staff and release certificates • Use of necessary tooling • Engineering support for CDR (when necessary) • Workshop report • Recommendation for further action • Overtime, weekends, bank holidays • Daily allowances • Visa and work permits Exclusions • All materials and handling charges and exchange fees • All travel expenses and hotel accommodation • All travel time • Transportation cost for material and tooling • Customs and taxes (if applicable) • Should there occur any delays, not caused by LHT, that lead to the extension of the scheduled duration of the requested work, Customer shall be charged additionally to an amount of 1.550,- EURO per person / per day. (ref. to Art. 3 °Charges') Prerequisites Customer shall provide: • Certificate Of Airworthiness • Complete Maintenance Program • AD Status of Airframe, Engines and APU • ETOPS-Lists • Last Performed / Next due Checks • List of all Life Limited Parts • Status of all LRU's • Run-Up protocols • Dirty Fingerprints • Radio Certificate I Noise Certificate • Assistance or allowance to access the aircraft • The required documentation shall be available to LUFTHANSA TECHNIK 1 week prior to the planned on-site assessment. • The aircraft YG006 Is on-site available. Customer's representative will meet LUFTHANSA TECHNIK personnel on-site and provide access to the aircraft documents and the Aircraft itself. Freestream shall provide a working room on-site with internist access for the on-site crew. • Aircraft in hangar for the time of inspection • Actual Maintenance Program (MP) and its approval • LOMP (List of modification performed). • TCDS • TCDSN • APU Log Book, Engine Log Book • Maintenance Status FH/FC Airframe, Engines, APU, LDG. Page 5 of 12, Offer Pre Buy Inspection VVY-201544-02. Rev.00 - 01 April 2015 EFTA_R1_02140619 EFTA02714532 S Lufthansa Technik • Technical and Cabin log since last CofA Airworthiness Review. • Deferred Item Status Report • CRS of last Checks (D-Check, C-Check) • Structure Defect Report. • Dent & Buckle Chart • List of all Repairs • Weight & Balance Report • STC List • On board aircraft documentation e.g. FCOM, RWC, FSM, AFM, AFM-S, QRH, etc. • Present revision status of AMM/IPC/FIM etc. • IPC-S Emergency Equipment. • Last Performed / Next due Checks (Excel List) 2.2 Maintenance and additional Work request dated 08.04.2015 • 2A Check according attached WP • Borescope of engines and APU with video -> Part of the Pre Buy Inspection • And soap oil analysis -> Incl. in 2A Check • Log book research engines and airframe -> Part of the Pre Buy Inspection • Test flight with Sellers pilots and Lufthansa Technik to sign off test flight card per Boeing (Customer has to specify test flight program and to be signed document) • 91.413 avionics check -> Incl. in 2A Check • CAMP due list projection for next 24 months -> A CAMP Maintenance due shall be prepared after receiving the CAMP access details. This is incl. in the Pre Buy Inspection • Assist John Strout DAR with 8130 cards and log book research in order qualify for USA C of A. -> upon availability of Lufthansa Technik specialist. Will be charged on a T&M base acc. Article 3.3 3 Charges 3.1 Airframe Assessment - Aircraft inspection on-site for 2 days - pre assessment of documentation - Issuing a report 26,400.- EUR 3.2 Borescoping - Borescoping of 2 CFM 58-7826/B1 - Borescoping of APU Honeywell 131-9B - Issuing of Workshop report 12,300.- EUR Page 6 of 12, Offer Pre Buy Inspection WY-2015-04-02, Rev.00 — 01 Apre 2015 EFTA_R1_02140620 EFTA02714533 1-,eD Lufthansa Technik Exclusions • In case that location Geneva is requested by Customer, travel expenses (50% business class ticket HAM — GVA — HAM), hotel accommodation, ground transportation will be charged in addition • My other Services • If there occur any delays not caused by Lufthansa Technik that lead to an extension of the scheduled duration of the requested scope of service, the Customer shall be charged additionally acc. following price list Qualification Price per person and Day [FUR] Month [EUR] Engineer / Quality 1.550 34.100 Assurance For location GVA the fol owing costs occur additionally to the above mentioned: Allowance per day/employee EUR 100 Overtime Rates (> 7,5 hrs/day) EUR 167 Travel Cost EUR as accrued & HC Hotel Accommodation EUR as accrued & HC 3.3 Maintenance • 2A-Check acc. attached WP and Scope of Service listed in Article 2.2 Including C&E Material for Routine work 31,500.—EUR All other Services are excluded and will be charged on a T&M basis acc. below listed Rates and Handling Charges 3.4 Charges for Additional Work and Handling Charges 3.4.1 Man Hour Rates Trade Currency Rate Licensed Aircraft Engineer EUR 139 Unskilled EUR 96 Sheet Metal EUR 138 Interior EUR 135 NDT / Boroscope EUR 158 Quality Assurance EUR 162 Engineering EUR 162 Notes: • Standard working hours 0700 — 2200 Monday to Friday except public holidays. Overtime surcharge of 50% shall apply for requested non-standard working hours. • For base maintenance services performed at location HAM no additional cost for special tooling will apply as far these tools are available and property of I.HT. • Maintenance Services not reflected in this Price List such as, but not limited to, moving of aircraft, on call maintenance, equipment usage Page 7 of 12, Offer Pre Buy Inspection WY-2015.04-02, Rev.00 — 01 April 2015 EFTA_R1_02140621 EFTA02714534 Lufthansa Technik 3.4.2 Nandlino Charms Ceiling per Handling Part Number/Service Service Charge [EUR] Min Max Subcont 15% 50 3.000 ract Material 25% 10r 15.000 • Material out of Lufthansa Technik's stock shall be charged at Manufacturer List Price (MLP) plus handling charge defined in the table above • Minimum material handling charges are not applicable for contracted maintenance routine work • Subcontracted work will be charged as per subcontractor's invoice plus a handling charge defined in the table above • A surcharge of EUR 250 shall be applied for orders from external suppliers, BFE/FOC material and/or for any order on AOG basis • For BFE/FOC parts a handling charge of 10% of their respective market value per Item shall be charged in addition to customs and shipping costs. A minimum charge of EUR 350 shall apply. 4 Schedule Documentation s The required documentation shall be available to LUFTHANSA TECHNIK 1 week prior to the planned on-site assessment. On-Site visit Start of Airframe Assessment on-site" TBD Duration of Airframe Assessment on-site 2 Days Start of Engine Borescoping on-site' TBD Duration of Engine Borescoping on-site 2-3 Days Start of 2A Check TBD Duration of 2A Check 7 days ("Note Airframe assessment & Borescope Inspection of Engine/APU upon availability of LHT Team Reporting Not later than 2 weeks after assessment on-site Page 8 of12. Offer Pre Buy Inspection WY-2015-04-02. Rev.00 - 01 AprN 2015 EFTA_R1_02140622 EFTA02714535 E-e) Lufthansa Technik 5 General Conditions Currency: If not otherwise mentioned, the currency used in this Proposal shall be Euro MUIR]. Price Level: Year 2015 Aircraft: BBJ, Reg. VP-BBJ, SN 29273 Engines CFM 56-7826/81 On-site: Geneva CRS A CRS shall be issued for the Scope of Work of the A2 Check only. If this work scope is revised or supplemented with additional Information, Lufthansa Technik reserves the right to revise the prices and or conditions of this Proposal accordingly. 6 Legal In accordance with LUFTHANSA TECHNIK's Standard Terms and Conditions (httpl/www.lufthansa- technik.com/enistandard-conditions). 7 Payment Terms Lufthansa Technik will provide an invoice covering the price according Article 3 with proposal acceptance, whereof the fix price amount shall be paid by Freestream prior the Aircraft assessment on- site. The remaining cost for the travel expense shall be paid by Freestream not later than 2 weeks after receiving LUFTHANSA TECHNIK assessment report. Page 9 of 12, Otter Pre Buy Inspection WY-201544-02, Rev.00 — 01 Apra 2015 EFTA_R1_02140623 EFTA02714536 en Lufthansa lechnik 8 Validity The information provided in this Offer is valid until 10th April 2015 and shall be subject to Man Power availability. We hope that this Proposal will meet Freestream full expectations and requirements. We are eager to perform the offered Services and we are available to meet with representatives to review and advance our Proposal at your convenience. Should you have any question or should you need additional Information, please do not hesitate to contact us and let us know how we can be of further assistance to you. We remain with the very best regards Lufthansa Technik AG Hamburg, 09.04.2015 ----x•slarc::: :: ).O8 SI Sven Helge Wagner Sascha Hauck Sales Executive Product Sales Manager VIP & Executive Jet Services VIP & Executive Jet Maintenance Freestrearn herewith accepts the terms and condition of this offer For and on behalf of Freestream Date: Name: Title: Par 10S 12,OfferPme.triflmindon IM4M54WMFWM-MN42015 EFTA_R1_02140624 EFTA02714537 e Lufthansa Technik ANNEX A Please find a generic assessment report attached (sample) Page 11 of 12. Offer Pre Buy Inspection WY-2015-04-02, Rev.00 - 01 April 2015 EFTA_R1_02140625 EFTA02714538 e Lufthansa rechnik ANNEX B Work Package dated 02nd April 2015 Page 12 of 12, Offer Pre Buy Inapectioo WY-2015-04-02, Rev.CO - 01 AO 2015 EFTA_R1_02140626 EFTA02714539 C O MP Work Order Contents Report SERIAL 29273 (YG006) REGN0 : VP-8BJ MODEL NAME 737-7001M-800/-900ER WORK ORDER it: A2 CHECK FOR PPI APR. 2015 DATE IN : UTC:09-Apr-2015 12:00 AM DATE OUT : UTC:17-Apr-2015 12:00 AM ICAO : SERVICE CENTER : JET AVIATION (GRIEVE) S.A. _ 1.0 050020 A-2 CHECK OPEN 1.1 050010 A-1 CHECK OPEN 12 21-14001 CHECK THE LEFT WATER SEPARATOR INDICATION NW (WITH THE AIR MNDMONING SYSTEM OPERATING) OPEN 1.3 21-14002 CHECK THE RIGHT WATER SEPARATOR INDICATION DISK (WITH THE AIRCOADMONING Stn JIM OPERATING) OPEN 1.4 21481-01 INSPECT AND CLEAN OR MACE THE LEFT HAND MC COMISCER BAG OPEN 1.5 21483-02 INSPECT AND DEAN OR REPIACE THE RIGHT MCAT COALESCER BAG OPEN 1.6 23-010-03 OPERATIONAL CHECK OF TIE VOICE RECORDER MID RECC4IDER INDEPENDENT POWER OPEN SUPPLY (RIPS) (IF INSTALLED). 1.7 23-11000 (FAR 91.207) INSPECT (FIXED) EMERGENCY LOCATOR TRANSMITTER TAW FM 91.207(0) OPEN 1.8 25-020-00 DETAIL INSPECTION OF THE CAPTAIN, FIRST OFFICER, FIRST OBSERVER AND SECOND OBSERVER (IF OPEN INSTALLED) SEAT HAMIESSES, CROTCH STRAPS, AND SHOULDER BELTS (AS APPLICABLE) FOR WEAR. CONDMCN AND SECURITY. 1.9 257001 GENEML VISUAL INSPECTION HFADUNOt =RC PANELS OPEN 1.10 257002 GENERAL VLSUM. INSPECTION INTERIOR BUUMEADS OPEN 1.11 257903 GENERAL VISUAL INSPECTION COMPARTMENT DOORS OPEN 1.12 257004 GBIERAL VISUAL INSPECTION SEATS ANDTABLES OPEN 1.13 n7005 GBIERAL VISUAL INSPECTION CART AND CABINETS OPEN 1,14 257006 GBIERAL VISUAL INSPECTION OW AND CARPET DOORS OPEN 1.15 257007 GENERAL VISUAL INSPECTION BED AND DIVANS OPEN 1.16 257011 CHECK SAFETY Ban OPEN L17 26-450-00 INSPECT (DETAILED) TIE PORTMLE HALON FIRE EXTINGUISHERS FOR PROPER PR FCSURE (IF GAUGE OPEN INSTM_LED), WEIGHT MD common. 1.18 27-102410 LUBRICATE STABLIZERIRD4 ACTUATOR AND ACTUATOR GIMBAL PINS AND au.NuT OPEN 1.19 27170-01 LUBRICATE LEFT WING TRAILING EDGE RAP ACTUATION MECHANISM OPEN 1.20 27-170-02 LUBRICATE RIGHT WING TRAILING EDGE RAP ACTUATION MEOUJI614 OPEN 1.21 *20-01 PATS OPERATIONAL CHECK OF THE AUXILIARY FUEL CONTROL UNIT OPEN 122 32-010-01 CLEAN LEFT MAIN LANDING GEM ASSEMBLY SHOCK STRUT OPEN 1.23 32-010-02 CLEAN RIGHT MAIN LADING GEAR ASSEMBLY SHOCX STRUT OPEN 1.24 32-020-01 SERVICE LEFT MAIN LANDING GEAR AMWAY SHOCK STRUT OPEN 1.25 32-02002 SERVICE RIGHT MAIN LANDING GEAR AMF_MBLY SHOCK STRUT OPEN 1.26 32430-01 LUBRICATE LEFT MAIN LANDING GEAR ASSEMBLY OPEN 1.27 32-030.02 USR1CATE RIGHT MAIN LANDING GEM ASSEMBLY OPEN 1.78 32-060-00 OEM NOSE LANDING GEAR 9100( STRUT OPEN 1.29 32-070.00 SERVICE NOSE RANGING GEM SHOCK STRUT OPEN 1.30 32-080-00 WIIPSCATE NOSE LANDING GEAR ASSEMBLY OPEN 1.31 32-2704)1 VISUAL CHECK LEFT BRAKE WEAR PINS FOR MINIMUM EXTENSION OPEN 1.32 32-27042 VISUAL CHECK RIGHT BRAKE WEAR PINS FOR MINIMUM EXTENSION OPEN 133 32800-00 EXTERNAL ZONAL INSPECTION (GV) NOSE LANDING GEAR NC LANDING GEM DOORS (FROM GROUND) OPEN PERFORM AN EXIERMJ. ZONAL INSPECTION ONO OF THE NOSE LAMING GEAR AND LANDING GEAR DOORS INSPECTION IS ACCOMFUSHED FROM THE GROUND, WITHOUT IHE USE OF STANDS OR IACOERS. (12AP) 02-APR-2015 Go CAMP STSI 1 of 3 LZ9OVLZO— ld—Vid3 EFTA02714540 Work Order Contents Report SERIAL: 29273 (%0%) REGNo : VP-BB) MODELKAMEf 897737.706HW/-800J-900ER WORK ORDER ✓h A2 CHECK FOR PPI APR. 7015 DATE DI : UTC:09-Apr -2015 12:00 AM DATE OUT : UTC:17-Apr-2015 12:DO AM ICAO s SERVICE cent* i in AVIATION (GENEVE) SA. 134 32-804-01 MTERNAL ZONAL INSPECTION (V) LIFT MAIN LANDING GEAR AND LANDING GEAR DOORS (FROM GROUND) OPEN PERFORM AN EXTERNAL ZONAL INSPECTION (GV) OF THE LEFT MAIN LANDING GEAR AND LANDING GEAR DOORS. INSPECTION LS NOCOMPUSHED PRAM THE GROUND, WITHOUT 11* USE OF STAIMS OR mums 1.35 3240342 DOMAN. ZONAL INSPECTION (CV) RIGHT MAIN LANDING GEAR NO LANDING GEAR DOORS (FROM GROUND) OPEN PERFORM AN EXTERNAL ZONAL INSPECTION (V) OF THE RIGHT MAIN LANDING GEAR AM) LANDING GEAR DOORS. INSPECTION IS ACCOMFUSHED FROM THE GROOM% WITHOUT THE USE OF STANDS OR LADDERS 136 33-010-00 OPERATIONAL CHECK DIERGENCY LIGHTS OPEN 137 33-055-00 FUNCTIONAL CHECK THE EPTEMAnt.f UGHTING BATTERY PACKS FOR CAPACITY (15 MIN. MINIMUM) AND CNE OFfN COMPLETE DEEP aca. 1.38 33-050-00 GENERAL VISUAL INSPECTION OF THE TRANSPATIBIT MIRING LENS LOCATED ON THE FORWARD LEADING OPEN EDGE OF THE WINGLET, LEFT AND RIG-IT 1.39 352002 GENERAL VISUAL INSPECTION CHEMICAL 02 MASK OPEN 1.40 352003 VISUAL INSPECTION OXYGEN SYS. 80X(S) OPEN 1.41 3520134 VISUAL INSPECTION OXYGEN SYS MASK(S) OPEN 1.42 381120 CHEER WATERMASTE CRAM LINES OPEN 1.43 385010 CLEAN WATER/WASTE INSIDE MDR OPEN 1.44 385015 CLEAN AFT GALLEY 511* DRAIN RLTER OPEN 1.45 52-150-00 LUBRICATE MRSTAM DOCR SYSTEM (INCLUDES TWO ROLLERS, GRUNGE DRIVE BEARING, DRIVE NUT IN OPEN JACK SCREW, WOK PIN GREASE FITTING AND FOUR BEARINGS IN THE CARRIAGE ROLLERS). 1.46 53-800-00 ECTEMIN. ZONAL INSPECTION (V) OF TIE LOWER FUSUAGE 'ME NOSE LANDING GEAR WIER WELL AND OPEN MAIN LANDING GEAR WHEEL WELL ARE ALSO DKI.UDED. INSPECTION IS ACCOMPLISHED FROM THE GROUND, WITHOUT THE UM OF STANDS OR MOMS. NO ADDITIONAL ACCESS PANELS REQUIRED (EZAP) 1.47 53-812.00 INTERIM ZONAL INSPECTION (V) FORWARD CARGO CONPARDIENT - SECTION 43, STATION 396 TO OPEN FORWARD CARGO COMPARTMENT AFT BULMEAD 1.48 534130-00 INTERNAL ZONAL INSPECTION (GV) AFT CARGO COMPARTMENT - SECTION 46 AND 47 (PART), STATION 727 CIRRI ID STATION 947.5 1.49 53-844-00 EXTERNAL ZONAL INSPECTION (CV) OF ME WING TO BODY FAIRING. INSPECTION IS ACCONFLISHED FROM OPEN TIE MOUND, WITHOUT THE USE OF STANDS OR UDDERS. NO ADDITIONAL ACCESS PANELS REQUIRE 1.50 53494-00 EXTERNAL ZONAL INSPECTION (V) OF THE FUSELAGE. INSPECTION IS ACCOMPLISHED FROM THE GROUND, OPEN %VICAR THE USE OF STANDS OR LADDERS. NO *comm. Acass PANELS REQUIRED 1.51 54-090-01 ROCTIONALLY CHECK THE MR' ENGINE FORWARD STRUT AND AFT STRUT FAIRING DRAMS. OPEN 132 54-090-02 FUNCTIONALLY CHECK THE RIGHT ENGINE FORWARD STRUT AM) AFT STRUT FAIRING DRAINS. OPEN 133 55-800-00 EXTERNAL ZONAL INSPECTION (GV) VERTICAL RN MO HORIZONTAL STABILIZER. INSPECTION IS OPEN Accompusne, FROM Pt GROUND, WITHOUT THE USE OF STANDS OR LADDERS. NO ADDITIONµ ACCESS PANELS REQUIRED 1.54 57-802-01 EXTERNAL ZONAL INSPECTION (CV) LEFT WING INSPECTION IS ACCOMPLISHED FROM THE GROUND, WITHOUT OPEN THE USE OF STANDS OR CADGERS. NO ADDMONAL ACCESS PANELS REQUIRED. 1.55 57-872-02 EXTERNAL ZONAL INSPECTION (V) RIGHT WING INSPECTION IS ACCOMPLISHED FROM ME GROUND, OPEN WITHOUT THE USE OF STANDS OR LADDERS. NO ADOMONAL ACCESS PANELS REQUIRED. 1.56 57-95001 EXTERNAL ZONµ INSPECTION OF THE LEFT WINGLET OPEN 1.57 57-952-01 INTERNAL ZONAL INSPECTION LEFT WINGLET OPEN 1.58 57-960-02 EXTERNAL ZONAL IEGFECTION OF THE RIGHT WINGE' OPEN 1.59 57-962-02 INTERNAL ZONAL INSPECTION OF ME RIGHT WINGLET OPEN 02-APR-2015 O CAMP SYSTEMS 2 of 3 n9OPLZO-ld-Vid3 EFTA02714541 Work Order Contents Report SERIAL : 29273 (YG006) REGNO : VP-881 MODEL NAME 737-7001~-800/-900ER WORK ORDERS: A2 CIIECX FOR PPI APR. 2015 DATE IN : WC:OS-Apr-201S 12:00 AM DATE OUT UTC:17-Apr-2015 12:CO AM ICAO: SERVICE CENTER : JET AVIATION (GENEVE) SA. SORT ITEM NO «SEfWiton STATUS Itattia ,/ • •".:;!;*‘ et. t‘s: 7~01 unseat mew. rmsoecnc« (GV) NO. 1ENGINi STRUT Kowa.BeNcrtori IS ACCOMPLISHED FROM OPEN THE GROUND, WITHOur 1HE USE OF STANDS OR LOADERS. NO wornc»:N. ACCESS PAI19.5 REQuIRED. 161 70411102 ECIERMAL 10.4,INSPECTION (1W) NO. 2 ENGINE STRUT FAIRINGS INSPECTION IS ACCOMPLISHED FROM OPEN 11* GROWS, WITHOUT THE 115E OF STANDS OR LADDERS. NO ADDITIONAL AO:ESS PANELS REQUIRED LES 7240341 DETAILED INSPECTION OF DEFT ENGINE INLET AND FAN BLADES, OPEN 1.63 72-02602 DETAILED INSPECTION OF RIGHT ENG/NE INLET MID FAN BLADES OPEN Prepared BY: [ Approved By: Date: 02-APR-2015 C CAMP bTaIØ 3 of 3 6?904 LZ0- 1. d—Vida EFTA02714542
ℹ️ Document Details
SHA-256
30971591587c58f2a6ad94252a9b663117aeb43c3ff597910bc1953f7e13a66a
Bates Number
EFTA02714528
Dataset
DataSet-11
Document Type
document
Pages
15

Comments 0

Loading comments…
Link copied!