EFTA00859668.pdf

From: ann rodriquez cza> To: Boscoar>, Rich Kahn a, Daphne Wallace Cc: Gene Kral ca Subject: Re: Barge List Date: Mon, 13 Apr 2015 17:38:09 +0000 Hey Boscoe, Please see questions —? I need a clear understanding of the listed items, What parts should we purchase and What can be done in house. 1. Rudders. — What should be done? 2. Steering Gear.---Did we buy the parts for this? 3. Hydraulic Cylinders.— What need to be done? 4. Exhaust system:— What are the issues? 5. Engine Mounts and alignment.— (Ok!) 6. Stuffing boxes/seals. Install new units:--- Should we buy the new units? 7. Cutlass bearings. — Do we need to purchase? 8. Engine Cooling Grid Coolers and Zinks. — What need to be done? 9. Bottom Paint and Barrier Coat/ Hull Zinks. — Should we purchase? 10. Engine and marine gear control bracket work. — Do we need to purchase? 11. Fuel tank clean out. Port and starboard. -- (Ok!) 12. Starboard deck fuel fill adapter replacement. — Should we replace or fix? 13. Bilge pumping system forward compartments. — What about the forward compartments? 14. Repair existing 24 volt alternator and add a second one to port motor. --- Should we purchase? 15. Inspect and size all hydraulic lines and fittings as needed. (Ok!) 16. Engine and marine gear instruments in control tower. --- What does this mean? 17. Install engine room lighting. — (Ok!) 18. Tune and service both engines and marine gear. —Any parts need? 19. Clean and paint engine room. — (Ok!) Ann R. DISCLAIMER: The information contained in this e-mail may be privileged,confidential, and protected from disclosure. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or duplication of this communication is strictly prohibited. If you have received this communication in error, please notify the sender Immediately and delete all copies. On Monday. April 13, 2015 12:22 PM, Boscoe e-. > wrote: The following is the list I discussed with Gene at Subbase Drydock today 4/13/2015. He is familiar with it and is now submitted for your review. Inspect and Repair the following; 1. Rudders. 2. Steering Gear. 3. Hydraulic Cylinders. 4. Exhaust system 5. Engine Mounts and alignment 6. Stuffing boxes/seals.. Install new units 7. Cutlass bearings EFTA00859668 8. Engine Cooling Grid Coolers and Zinks 9. Bottom Paint and Barrier Coat/ Hull Zinks 10. Engine and marine gear control bracket work. 11. Fuel tank clean out. Port and starboard 12. Starboard deck fuel fill adapter replacement 13. Bilge pumping system forward compartments 14. Repair existing 24 volt alternator and add a second one to port motor. 15. Inspect and size all hydraulic lines and fittings as needed. 16. Engine and marine gear instruments in control tower 17. Install engine room lighting 18. Tune and service both engines and marine gear. 19. Clean and paint engine room. Timing of work I have been told this haul out must be done in late April or May as there is scheduled and contracted work reported for this facility during June, July and August. Please, respond with any questions you may have. EFTA00859669