EFTA02002682.pdf

To: jeevacationftmacompeevacation©gmacomi: J Epstein(jeevacation©gmail.com] From: Scott Denett Sent Tue 5/24/2011 9:37:53 PM Subject: JBL speakers 6th floor 71st I did find one place that may be able to help us but i want to confirm with you some facts on the speakers i took both good speakers and put them into I cab as they are exactly the same top and bottom ( model jbl 706g) and ONLY the top speakers plays when plugged in the reason for this is described here below from the manual 6. Ifyou have purchased the Synthesis Three Home Media System, which utilizes the S3M speakersfor the left and right channels, it is necessary to connect thefive pin din cable (included) to each speaker. This cable is essential to the system, for it allows the speakers to switch from the music mode to the cinema mode. Plug one end into the five pin din jack (located above the speaker terminals) and the other end into the jack located on the power sequencer labeled "Speaker I ". Do the samefor the second speaker. so the company I found for repair is http://www.earsnyc.com/ the person who would specialize in this type of repair was not in and will be in wed around 12:30 pm I was told -scott EFTA_R1_00499970 EFTA02002682