EFTA01198319.pdf
1 OF 2 150526 WRO BBJ PIC0082015 NOT SUBMITTED YET iii
WORK REQUEST ORDER
PICTON II LTD
VP-BBJ I B737-72U I SN 29273 I YG006
AFT AFL E1T E1C E2T E2C I APUT I APUC
TO: FROM (CAM):
Seyidi Ersevik Steve Wilson
COMPANY: DATED:
Jet Aviation Geneva 26.05.2014
FAX NUMBER: QUOTATION REFERENCE:
N/A
EMAIL ADDRESS: WORK REQUEST ORDER NUMBER:
seyidi.ersevik@jetaviation.ch PIC0082015
W/O ENTRY
ITEM DESCRIPTION
SIGNATURE
1. WHILE AIRCRAFT IS NOT IN MAINTENANCE:
Perform "Aircraft Active Storage once per week. Engines / APU should be run and if possible
aircraft taxied every 2 weeks. GPU to be connected every week for at least 45 minutes.
NOTE 1: Breaks and Reverse Thrust to be activated as often as possible.
NOTE 2: All Active Storage activities to be signed off individually in the Flight Log with relative
DATES showing in the WP. New Flight Log pages to be printed as required.
2. Perform Engine Lip polishing and protection as required - every 2 weeks to check on condition
please.
3. Comply with Due Maintenance CAMP WO attached - "VP-BBJ MONTHLY JUN 2015".
4. Perform with NDB Update.
5.
THANK YOU
EXPECTED ARRIVAL: 05.06.2015
REQUESTED AVAILABILITY: 30.06.2015
CONTINUED AIRWORTHINESS MANAGEMENT (on behalf of PICTON II Ltd)
Qjet Aero I Switzerland I Info@qjet.aero I Tel
EFTA01198319
2 OF 2 150526 WRO BB] PIC0082015 NOT SUBMITTED YET
WORK REQUEST ORDER
INSTRUCTIONS RELEVANT - CERTIFICATE OF RELEASE TO SERVICE (CRS)
1. After entry of Work Request Items into MRO system, Planning or Technical
Support shall sign in the allocated space. Signature indicates that request(s)
have been transferred to the actual project.
2. Item numbers showing "*" have been amended/added after original order
was issued.
3. Certificate of Release to Service (CRS) shall refer Work Request Order
Number and encompass all requested items unless otherwise specified or
communicated.
4. Work Order entries (items) shall detail maintenance reference/specific
chapters in all cases. Generic references and vague statements will not be
accepted. AMM revision status shall also be indicated.
5. CRS shall comprise Flight Log Entry/Stamp/Signature and printed Certificate
for Aircraft/Engine/APU Logbook(s).
INSTRUCTIONS RELEVANT - CONTINUED AIRWORTHINESS MANAGEMENT
1. Before aircraft departure CRS, WO and Flight Log Entry shall be scanned and
sent to the Continued Airworthiness Manager (CAM) for review.
2. After project closing, all CAMP Cards including CRS shall be scanned and sent
to CAMP SYSTEMS for update within 5 working days.
3. Original Work Package documents shall be handed to the Operator or CAM as
arranged.
Note: There is no requirement for originals/copies of procedures used during
maintenance to be provided.
CONTINUED AIRWORTHINESS MANAGEMENT (on behalf of PICTON II Ltd)
Qjet Aero I Switzerland I Info@cijet.aero I Tel:
EFTA01198320
CAMP Work Order Contents Report
SERIAL: 29273 (YG006) REGNO : VP-BBJ MODEL NAME : BBJ 737-700IGW/-800/-900ER WORK ORDER #: VP-BBJ MONTHLY JUN 2015
DATE IN : UTC:03-Jun-2015 12:00 AM DATE OUT : UTC:12-Jun-2015 12:00 AM ICAO : SERVICE CENTER : JET AVIATION (GENEVE) S.A.
SORT ITEM NO DESCRIPTION STATUS
COMPLIANCE NEXT DUE TIME
REMAINING
1.0 05-00014 ACTIVE STORAGE PROCEDURE OPEN
2.0 050060 MONTHLY CHECK OPEN
2.1 267001 VISUAL INSPECT PORTABLE HALON FIRE EXTINGUISHERS FOR GENERAL CONDITION AND SERVICEABILITY OPEN
2.2 32.36000 VISUAL CHECK NOSE AND MAIN LANDING GEAR TIRES MD WHEELS FOR CONDITION AND WEAR. OPEN
2.3 330040 CHECK EXTERIOR LIGHTING FOR PROPER OPERATION OPEN
2.4 351040 PERFORM CREW OXYGEN SERVICING OPEN
2.5 290040 PERFORM HYDRAULIC OIL LEVEL SERVICING OPEN
2.6 240040 PERFORM IDG OIL LEVEL SERVICEING OPEN
2.7 490040 PERFORM MU OIL LEVEL SERVICING OPEN
2.8 2741-00 PERFORM REPETITIVE GV INSPECTION OF STABILIZER CONTROL CABLE AREA MARKED WITH RED PAINT IN OPEN
THE AFT/LOWER FUSELAGE REGION, FOR CONDITION DETERIORATION.
2.9 24.10000 OPERATIONAL CHECK OF THE STANDBY POWER CONTROL UNIT (SPCU). OPEN
2.10 32.35000 CHECK NOSE AND MAIN LANDING GEAR TIRES FOR PROPER INFLATION, SERVICE AS REQUIRED OPEN
2.11 256151 INSPECT SMOKE GOGGLES OPEN
2.14 737.32-1448 TABLE 1.1 LUBRICATE LANDING GEAR - MAIN LANDING GEAR - FORWARD AND AFT TRUNNION PIN ASSEMBLIES OPEN
INSPECTION MD CHANGE, SERVICE BULLETIN THE MLG FORWARD AND AFT TRUNNION PIN ASSEMBLIES FOR
ALL AIRPLANES
3.0 252501 VISUALLY CHECK FORWARD ENTRY DOOR EMERGENCY ESCAPE SLIDE PRESSURE BOTTLE FOR PROPER OPEN
PRESSURE
4.0 252502 VISUALLY CHECK FORWARD SERVICE DOOR EMERGENCY ESCAPE SLIDE PRESSURE BOTTLE FOR PROPER OPEN
PRESSURE
5.0 252503 VISUALLY CHECK AFT ENTRY DOOR EMERGENCY ESCAPE SLIDE PRESSURE BOTTLE FOR PROPER PRESSURE OPEN
6.0 252504 VISUALLY CHECK AFT SERVICE DOOR EMERGENCY ESCAPE SLIDE PRESSURE BOTTLE FOR PROPER PRESSURE OPEN
7.0 347101 UPDATE NAV DATABASE OPEN
Prepared By: Date:
Approved By: Date:
03-JUN-2015 © CAMP SYSTEMS 1 of 1
EFTA01198321
WORK REQUEST ORDER
PICTON II LTD
VP-BBJ I B737-72U I SN 29273 I YG006
AFT AFL E1T E1C E2T E2C I APUT I APUC
TO: FROM (CAM):
Seyidi Ersevik Steve Wilson
COMPANY: DATED:
Jet Aviation Geneva 26.05.2014
FAX NUMBER: QUOTATION REFERENCE:
N/A
EMAIL ADDRESS: WORK REQUEST ORDER NUMBER:
seyidi.ersevik@jetaviation.ch PIC0082015
W/O ENTRY
ITEM DESCRIPTION
SIGNATURE
1. WHILE AIRCRAFT IS NOT IN MAINTENANCE:
Perform "Aircraft Active Storage once per week. Engines / APU should be run and if possible
aircraft taxied every 2 weeks. GPU to be connected every week for at least 45 minutes.
NOTE 1: Breaks and Reverse Thrust to be activated as often as possible.
NOTE 2: All Active Storage activities to be signed off individually in the Flight Log with relative
DATES showing in the WP. New Flight Log pages to be printed as required.
2. Perform Engine Lip polishing and protection as required - every 2 weeks to check on condition
please.
3. Comply with Due Maintenance CAMP WO attached - "VP-BBJ MONTHLY JUN 2015".
4. Perform with NDB Update.
5.
THANK YOU
EXPECTED ARRIVAL: 05.06.2015
REQUESTED AVAILABILITY: 30.06.2015
CONTINUED AIRWORTHINESS MANAGEMENT (on behalf of PICTON II Ltd)
Qjet Aero I Switzerland I Info@qjet.aero I Tel
EFTA01198319
2 OF 2 150526 WRO BB] PIC0082015 NOT SUBMITTED YET
WORK REQUEST ORDER
INSTRUCTIONS RELEVANT - CERTIFICATE OF RELEASE TO SERVICE (CRS)
1. After entry of Work Request Items into MRO system, Planning or Technical
Support shall sign in the allocated space. Signature indicates that request(s)
have been transferred to the actual project.
2. Item numbers showing "*" have been amended/added after original order
was issued.
3. Certificate of Release to Service (CRS) shall refer Work Request Order
Number and encompass all requested items unless otherwise specified or
communicated.
4. Work Order entries (items) shall detail maintenance reference/specific
chapters in all cases. Generic references and vague statements will not be
accepted. AMM revision status shall also be indicated.
5. CRS shall comprise Flight Log Entry/Stamp/Signature and printed Certificate
for Aircraft/Engine/APU Logbook(s).
INSTRUCTIONS RELEVANT - CONTINUED AIRWORTHINESS MANAGEMENT
1. Before aircraft departure CRS, WO and Flight Log Entry shall be scanned and
sent to the Continued Airworthiness Manager (CAM) for review.
2. After project closing, all CAMP Cards including CRS shall be scanned and sent
to CAMP SYSTEMS for update within 5 working days.
3. Original Work Package documents shall be handed to the Operator or CAM as
arranged.
Note: There is no requirement for originals/copies of procedures used during
maintenance to be provided.
CONTINUED AIRWORTHINESS MANAGEMENT (on behalf of PICTON II Ltd)
Qjet Aero I Switzerland I Info@cijet.aero I Tel:
EFTA01198320
CAMP Work Order Contents Report
SERIAL: 29273 (YG006) REGNO : VP-BBJ MODEL NAME : BBJ 737-700IGW/-800/-900ER WORK ORDER #: VP-BBJ MONTHLY JUN 2015
DATE IN : UTC:03-Jun-2015 12:00 AM DATE OUT : UTC:12-Jun-2015 12:00 AM ICAO : SERVICE CENTER : JET AVIATION (GENEVE) S.A.
SORT ITEM NO DESCRIPTION STATUS
COMPLIANCE NEXT DUE TIME
REMAINING
1.0 05-00014 ACTIVE STORAGE PROCEDURE OPEN
2.0 050060 MONTHLY CHECK OPEN
2.1 267001 VISUAL INSPECT PORTABLE HALON FIRE EXTINGUISHERS FOR GENERAL CONDITION AND SERVICEABILITY OPEN
2.2 32.36000 VISUAL CHECK NOSE AND MAIN LANDING GEAR TIRES MD WHEELS FOR CONDITION AND WEAR. OPEN
2.3 330040 CHECK EXTERIOR LIGHTING FOR PROPER OPERATION OPEN
2.4 351040 PERFORM CREW OXYGEN SERVICING OPEN
2.5 290040 PERFORM HYDRAULIC OIL LEVEL SERVICING OPEN
2.6 240040 PERFORM IDG OIL LEVEL SERVICEING OPEN
2.7 490040 PERFORM MU OIL LEVEL SERVICING OPEN
2.8 2741-00 PERFORM REPETITIVE GV INSPECTION OF STABILIZER CONTROL CABLE AREA MARKED WITH RED PAINT IN OPEN
THE AFT/LOWER FUSELAGE REGION, FOR CONDITION DETERIORATION.
2.9 24.10000 OPERATIONAL CHECK OF THE STANDBY POWER CONTROL UNIT (SPCU). OPEN
2.10 32.35000 CHECK NOSE AND MAIN LANDING GEAR TIRES FOR PROPER INFLATION, SERVICE AS REQUIRED OPEN
2.11 256151 INSPECT SMOKE GOGGLES OPEN
2.14 737.32-1448 TABLE 1.1 LUBRICATE LANDING GEAR - MAIN LANDING GEAR - FORWARD AND AFT TRUNNION PIN ASSEMBLIES OPEN
INSPECTION MD CHANGE, SERVICE BULLETIN THE MLG FORWARD AND AFT TRUNNION PIN ASSEMBLIES FOR
ALL AIRPLANES
3.0 252501 VISUALLY CHECK FORWARD ENTRY DOOR EMERGENCY ESCAPE SLIDE PRESSURE BOTTLE FOR PROPER OPEN
PRESSURE
4.0 252502 VISUALLY CHECK FORWARD SERVICE DOOR EMERGENCY ESCAPE SLIDE PRESSURE BOTTLE FOR PROPER OPEN
PRESSURE
5.0 252503 VISUALLY CHECK AFT ENTRY DOOR EMERGENCY ESCAPE SLIDE PRESSURE BOTTLE FOR PROPER PRESSURE OPEN
6.0 252504 VISUALLY CHECK AFT SERVICE DOOR EMERGENCY ESCAPE SLIDE PRESSURE BOTTLE FOR PROPER PRESSURE OPEN
7.0 347101 UPDATE NAV DATABASE OPEN
Prepared By: Date:
Approved By: Date:
03-JUN-2015 © CAMP SYSTEMS 1 of 1
EFTA01198321