EFTA02353937.pdf

From: Ann Rodrique Sent: Wednesday, December 9, 2015 6:07 PM To: Jeffrey E.; Rich Kahn Subject: Fwd: Costs of Asphalt Surface Treatment Ann R. Begin forwarded message: From: Eason Jeffers <[email protected] Date: December 9, 2015 at 12:56:12 P To: ann rodriquez Cc: Daphne Wallace Subject: Costs of Asa.) ace rea men Good Day Ana, I have analyzed some costs for asphalt surface treatments. The most cost effective c would be to use the locally available chips or screened materials which costs about $0.59 per square ft. in place. The color of this material is grayish blue and gray with some hints of brown. Another option is more colorful aggregates which would have to be imported and would cost about $0.79 per square ft. in place. The colors for the imported material can vary depending on the source. The way that the surface treatment would be applied is to shake them onto freshly laid asphalt surface then roll the material into the pavement creating a monolithic course while exposing just enough aggregate to create the desired effect, which also improves skid resistance. The surface area on LSJ to be paved is @ 13,000 square yards. So, the added costs of the aggregates would range between $69,030.00 and $92,430.00. Please feel free to contact me if there are any questions. Kindest Regards, Eason Jeffers USVI General Manager Betteroads Asphalt Corporation EFTA_R1_01335015 EFTA02353937 2 EFTA_R1_01335016 EFTA02353938