EFTA01042225.pdf

From: Eric Roth c To: Jeffrey E. [email protected]> CC: ' -= >, Richard Kahn < Subject: G550 Date: Mon, 26 Jun 2017 20:23:18 +0000 Wine-Images: image001.png; image003jpg; image005jpg; imagc007.jpg; imagc009.jpg; imageOl6.jpg Divan ann rests are currently 6.125" I am thinking they should be 8.00" wide. We are creating a mockup right now to gel a better visual for complete conviction or alteration. V. The wood veneer below is a sample with NO Stain and NO finish - it is just mw. Maybe anodize the handle to blend in with the wood (like the hinges on the sidewall tables)? Maybe we could fabricate a new handle from mahogany? What are your thoughts? EFTA01042225 GJ Removing and modifying the aft upper galley is a really big deal. There is a phone in the fwd upper section, a I l0vAC outlet above the countertop and the hutch lighting. Once tis upper is removed, there will be holes in the counter top as well as the aft bulkhead. There may also be UVA discoloration in the footprint of the bulkhead veneer where the hutch was mounted. The main cabin upper valance! PSU and handrail need to modified and/or extended depending on where we break the division between cabin and galley. Many peripheral panels need to be removed to gain access to the area. This can't be done during this phase! down time. EFTA01042226 A EFTA01042227 Best Regards. Eric ERIC H. ROTH I PRESIDENT I Logo - Horizontal-SMALL 2221 Smithtown Avenue, long Island MacArthur Airport, Ronkonkoma, New York 11779 EFTA01042228