EFTA01808714.pdf

From: michael glidden <S> Sent: Wednesday, June 12, 2019 8:32 PM To: Richard Kahn Cc: ann rodriquez; Daphne Wallace; MYLA TRESTIZA Subject: Re: Vermeer RTX1250 Trencher Options I can look into it but do not believe it to be an option. =he longer the chisel bit, the more brittle it is. On Wed, Jun 12, 2019 at 4=30 PM Richard Kahn <[email protected] <mailto:[email protected]» wrote: should we buyer a hammer wit= larger depth? Richard Kahn HBRK Associates Inc. 575 Lexington Avenue 4th =loor • New York, NY 10022 On Jun 12, 2019, at 4:29 PM, michae= glidden wrote: Any of it could be done with=excavators. It will just take two, full time. One with a hammer on it =nd a second with a bucket. The trench will be a minimum of two feet wide v= 8" and far more invasive by far than a trencher. Also, in order to g=t to the proper depth, 36", the excavators will have to do a mi=imum of two passes each for every foot of trench due to the maximum plunge=depth of the hammer witch is roughly 20-24". = at 2:38 PM Richard Kahn wrote: mike=how much of trenching work can be done with excavators? jee does not w=nt to purchase new machine.. daphne when you return can you try =o source used machines with mikes specs below thank you Richard Kahn EFTA_R1_00158888 EFTA01808714  HBRK Associates Inc. 575 Lexington Avenue 4th =loor New York, NY 10022 Begin forwarded message: From: =/span>michael glidden <[email protected] <mailto:mjg.lsj@g=ail.com» Subject: Fwd: Vermeer RTX1250 Trencher Options Date: May 10, 2019 at 1:43:43 PM EDT To: Richard=Kahn • Wallace tephanie Remington As mentioned previously, here is the quote from Verm=er for a second option on a trenching machine for GSJ. Both units are =pen air cab type with no glass. These two and the Ditchwich unit=are suitable for our purposes and all three are currently in stock and rea=y for shipment. Forwarded message From: Manny AyalallIMIRIMPIMIRMIPIRIIRIMPM Date: Fri, May 10, 2019 at=12:19 PM Subject: Vermeer RTX1250 Trencher Options To: Michael, =/p> G=od afternoon, please find the attached quotations for your consideration! = have included the following: 2 EFTA_R1_00158889 EFTA01808715  1. RTX1250i2 Platfor= Unit- This unit is the upgraded version of the RTX1250- thus having a dif=erent engine (Deutz) with a little more HP and different configuration giv=ng you added benefits for quick removal of attachments! 2. RTX1250RW- Unit is a 2018 Mod=l new but had gone out for one rental — has a total of 131Hours =E24›. thus the savings on the unit. Both units are equipped with sliding offset attachments =nd 8" Wide cut — I can change the 8" for 64e=9D but would need 10.15 days from time of order to have ready, otherwise t=e units are ready to go! Additionally I have included filters and oil to service each unit for a period of up to 1000 hours based on the ser=ice intervals that are required for both engine and hydrostatic system.4>=A0 Also note currently they are both available — New Ordered unit =s 8-12 Weeks from time of order. Also note both options are 4 POST ROPS but non CAB- Open Air Units! The quot=s include a 1 year or 1000 hour warranty on each whichever comes first, de=ivery to US Port and training on site at time of delivery!! Please do not hesitate to contact me with any questions that=you may have concerning each option. Thank you for the opportunity and I will look forward to you= response. Sincerely, =C240 =/td> =/div> 1060 W. Industrial Ave. Boynton Bea=h, Florida 33426 www.vermeersoutheast.com <1=> 3 EFTA_R1_00158890 EFTA01808716 =div> 4 EFTA_R1_00158891 EFTA01808717