EFTA01002258.pdf

From: "Jeffrey E." <jeevacation®gmail.com> To: Larry Visoski Subject: Re: Bell float bags Date: Wed, 03 Dec 2014 02:19:48 +0000 Inline-Images: IMG_2019.JPG sell and you keep money On Tue, Dec 2, 2014 at 9:12 PM, Larry Visoski <Ma> wrote: Jeffrey An upper state helicopter company called me last week: Tom Woerlen Director of Maintenance National Helicopters Inc. Tom asking if we are interested in selling our B430 float bags that are removed off your B430., The nitrogen bottle we own has a shelf life until 2015, which is almost timed out., cost to replace is $12,300 The offer to purchase our float bags and hardware as seen in photo below is $40,000 to you. I have to confirm these bags are in airworthy condition to complete this deal if you accept., Our floats have been removed for over 5 years and most likely will deteriorate just sitting on the shelf in my office. I have no plans to install the floats on our helicopter due to the weight increase of approximately 200Ibs., Brand new floats cost $180k from Bell installed with 2 year wait time for parts., Do you approve of selling our old floats bags for $40,000.00 or just keep them? Thank you Larry Sent from my iPhone Begin forwarded message: From: "Tom Woerlen" Date: December 2, 2014 at 11:48:08 AM EST To: "'Larry Visoski'" <MMI > Subject: RE: Floats EFTA01002258 Hi Larry, sorry about the Boeing thing! We'd agree with the Dave's evaluation and are prepared to offer $40k (assuming it's all serviceable) at this point only due to the bottle turning into a pumpkin next month. New bottles are available and our price is about $12.3k, which would bring us back to the $50k-ish mark. In addition, if throughout this installation process, it gets determined that there may be a few items still existing on your a/c that we could use, we would be willing to pay additionally for those if you're willing to take them off? We'd love to make a deal, so please let me know. Tom Woerlen Director of Maintenance National Helico ters Inc. Original Message----- From: Larry Visoski mailto: Sent: December-01-14 7:00 PM To: Tom Woerlen Subject: Re: Floats Hello Tom, I've had a broken Boeing the past three days and been extremely busy., What price are you thinking of offering for my floats parts that I have so I can let my boss know, I think it would be helpful if you could tell me what price you're thinking that's fair? Thx Larry Sent from my iPhone On Nov 26, 2014, at 4:42 PM, Tom Woerlen wrote: Hi Larry, Let's work out a deal. Can you inquire further as to the owners willingness to sell? EFTA01002259 Just fyi, the float bottle is due to expire in Jan 2015. Cheers, Tom Woerlen Director of Maintenance National Helicopters Inc. Original Message----- From: Larry Visoski mailto: Sent: November-25-14 7:58 PM To: Tom Woerlen Subject: Floats Hello Tom,. I just received your voice mail, sorry u missed your call. I was out flying today, not sure if you knew, we operate a Gulfstream IV and Boeing 727 along with our Bell 430., I met with David Burch manger at Bell in Fort Lauderdale Excutive airport yesterday., I explained you are interested in acquiring my float system, he confirmed the lead time is up to a year for float system parts, EFTA01002260 depending out which parts you need., I tried researching my log books for a part number for my floats to no avail., David recommended contacting Bell in Piney Flats to research my float system., My serial number B430 is 49078 I attached a photo of the Bell part number for the Nitrogen blow bottle if this helps., I'm sure there is great researched involved trying to find out if this float system will work on your helicopter., There are some parts still installed on my helicopter that you will have to buy from bell to complete the system, however I am able to offer everything in the previous photo I sent as far as floats bottle and other hardware that you see in the photograph., I'm sure this is approximately 80 to 90% of the parts needed for your install., I would have to get approval from my owner If he is willing to accept an amount of money for the parts I have to offer you., I'm not sure what price you think your willing to pay? Mr Burch thought a fair price for what I have in parts is in the $50,000.00 range., You can call me anytime tomorrow I am free most of the day., at the least, if you wish to proceed I would recommend having bell inflate the bags to make sure they are acceptable and pass, I want to be fair. Best regards, Larry Visoski Director of Operations JEGE, Inc / Jege, LLC Hyperion Air, LLC 3800 Southern Blvd suite 204 West Palm Bch FI, 33406 EFTA01002261  Sent from my iPhone please note The information contained in this communication is confidential, may be attorney-client privileged, may constitute inside information, and is intended only for the use of the addressee. It is the property of JEE Unauthorized use, disclosure or copying of this communication or any part thereof is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by return e-mail or by e-mail to [email protected], and destroy this communication and all copies thereof, including all attachments. copyright -all rights reserved EFTA01002262