📄 Extracted Text (1,542 words)
Watcher Help for Mac OS X
Watcher® allows you to manage and monitor the connection between
your AirCard®or Compassm modem and the network by:
Determining signal strength, warning status, 3G high-
speed data availability, and other network connection
parameters.
Mac Initiating and ending data calls.
System requirements
Watcher requires a computer running Mac OS® X 10.4.11 or
later.
Installing Watcher
For TRU-InstallTmequipped modems
If your modern is equipped with TRU-Instae — a Sierra
Wireless feature that places all the required software on the
modem, eliminating the need for an installation CD:
1. Insert the SIM card in your modem if it is not already
inserted.
2. Insert the modern into your Mac.
3. Run the Installer.
4. Follow the instructions.
The modem is ready to use once the software is successfully
installed and Mac OS has restarted.
On subsequent insertions of the modem, TRU-Install verifies
that the correct software is already installed. If it is, then the
modem is ready to use. This process takes a few seconds.
Rev 1.7 Oct 08 1
EFTA00730169
For all other modems or if you do not see
the TRU-Install window
1. Go to the Sierra Wireless website Support section:
2. Select your carrier, your product, and Mac OS X.
3. Follow the on-screen instructions to download and install
the software.
You can also download the latest copy of this Quick Start
Guide from the support website.
Launching and closing Watcher
To launch Watcher:
• Click the Watcher icon * in the Dock.
lb close Watcher:
Use the Application Switcher (Command S + Tab) to choose
Watcher, and type Command + O or choose Quit in the
Application Menu.
Close button Minimize button
( Connect )
Call Status area
Figure 1: Watcher main window
2 2130853
EFTA00730170
Watcher for Mac Help
Window controls
• The Minimize button minimizes the Watcher window to an
icon in the Dock and leaves the application running.
To maximize the Watcher window, select the Watcher
window icon in the Dock.
• The Close button closes the Watcher window but leaves the
application running. When the Watcher window is closed,
you have no way to access any status information unless
you re-open the window by selecting the Watcher icon in
the Dock. However, you can still use the connection until
you quit the application or disconnect using the
Application Menu.
Interpreting status area icons
Icon Meaning
10 1
The modem is not detected.
Type of network:
3G • 3G—The indicator is on (black)
• 2G—The indicator is off (gray)
The Signal Strength Indicator shows the Intensity of
all the radio signal. The more bars, the stronger the
signal (up to a maximum of four bars).
When the bars are off (gray), no connection is
sal possible for one of the following reasons:
• You are outside the network coverage area.
• The signal strength is too weak.
• A network or account problem is preventing the
modem from obtaining service.
Rev 1.7 Oct 08 3
EFTA00730171
Icon Meaning (Continued)
R The Roaming Status indicator shows whether you are
roaming on the network of a service provider other
than your own.
When the indicator is off (gray), you are within the
local coverage area of your service provider. When
the indicator is on (black), you are in a "preferred-
roaming area.
Your coverage area varies depending upon your
service provider and the type of account you have.
There may be varying surcharges for roaming service
depending on whether you are in a preferred or non-
preferred roaming area. If there is no roaming
agreement between your service and the local carrier.
you may be unable to complete calls.
Selecting the active network
You can specify how a network is chosen by selecting
SierraWatctiet > Preferences > Network and then selecting one of
the available options.
SierraWatcher File Edlt Window Help
About SierraWatcher
Preferences...
Services ►
Hide SierraWatcher XH
Hide Others X NH
Cnr-rw A'r
Quit SierraWatcher XQ
Figure 2: Selecting Preferences in Watcher
However, your service provider may not permit manual
network selection. If it is restricted, the Network button in the
Preferences pane will be grayed out.
1•
• 0 (7)
General Profiles Network
Figure 3: Manual network selection is not permitted
4 2130853
EFTA00730172
Watcher for Mac Help
Selecting the network automatically
Select this option in the SierraWatcher > Preferences> Network
pane to have the modern automatically select the best available
network.
Select network automatically KU
Select network from the list of defined networks XD
✓ Select network from the list of available networks XB
Figure 4: Available network selection preferences
Selecting the network from the list of
defined networks
Select this option in the SierraWatcher > Preferences> Network
pane to choose the network from a list of carriers pre-loaded
on to Watcher.
You can filter the list by country:
en A Prekrences
5 (9 t e o
COWIJ Proein, Nano* Slielocoritv
Select network from the hit of defined networks tv country or network
maw. I
g Moths
FI ANIOnO
ICI ,
Angualla
Argent")
e trenteua
MIM• ,,,,, oso
Figure 5: Filtering the defined list by country
Rev 1.7 Oct 08
EFTA00730173
I and by carrier:
nee Preferences
0 ‘O.) @I' 0
nom.. mown us SOCuittf
Street netwoa from the Int a defined networks 'clt- tat
SIITanson. Prtralte a... Able Carrier I 2G network
Able Carrier 2 3G network
Able Carver 3
Able Carrier 4
Able Carrier 5
12MMEZIE CI
Able Carrier 7
ke'revi
4
Figure 6: Filtering the list by country and carder
Note: It may take Watcher Selecting the network from the list of
several minutes to find available
networks.
available networks
Select this option in the SlerraWatcher > Preferences > Network
pane to have Watcher scan for available networks in your area.
1. Select Refresh to begin the network scan.
2. When the scan is complete, select a carrier and the network
you want to connect to.
Es r) Preferences
5 t.vd3 A
Gene... non*, Mewed& 51115.0ot,
Select network from the lest of avenstk networks Q- by country or network
2G network
3G network
4
Figure 7: Choosing a carrier from a list of available networks
When the network selection successfully completes, you will
see the change in the main window.
2130853
EFTA00730174
Watcher for Mac Help
Figure 8: Watcher main window
Automatically manage
connection profiles
Select this option in Preferences > General to automatically
generate the best settings for your Subscriber Identity Module
(SIM) card/subscription model.
0 0' Preferences
General Nobles •,
Notify Me
gwhen closing application
When I quit application!
5 close existing connection
gAutomatically manage connection profiles
Figure 9: Setting Watcher to automatically manage connection profiles
The settings are saved under a profile named "[Your service
provider's name] Auto".
lb display all available profiles, select the Profiles button in the
Preferences pane.
Rev 1.7 Oct 08 7
EFTA00730175
one Pavan 0
6 (2)
awe Irate
Pak tta
dAbleOmer Ati,cs amines
C Able Carnet &co Modified Alcoa Vu.
C µt Prato a Patron)
AW
des
Pr. %an. Da
Second." en%
1.1.1
4
Figure 10: Displaying all available connection profiles
You can create a new profile with your own settings by
selecting the + at the bottom-left corner of the pane.
rt e Panda.
a (A 0
Cars Sluk, ••••
ata hat hat
4 Nate Grew Moble affebitit
4 /Ole Carnet Atom ft
PasCsoneql
ari
APh
EIS
Praia 014 0004
&None.," 0.6 0000
kin
A
Figure 11: Creating a new profile
SIM security
The SIM Security button allows you to select whether or not the
SIM card queries the user for the Personal Identification
Number (PIN).
'e en Preferences CJ r
General Plats
e —0-
'Ulan SIN Security
g Enable check PIN Change PIN
Figure 12: Setting the SIM card query option
8 2130853
EFTA00730176
Watcher for Mac Help
Warning: If you fail to To change this option, you must know the correct PIN number.
enter the correct PIN coo Preferences
number within the desig-
Please enter your PIN number
nated number of attempts, General
your SIM card will be PIN Number:
disabled and become
unusable. If that happens, Cancel )
contact your service
provider.
Figure 13: Entering your PINnumber
Support
If you encounter any problems not covered in this document:
• Visit the Sierra Wireless support site at
where you can:
• Download Watcher software.
• Search an extensive knowledge base for a solution to
address the problem.
• Email Sierra Wireless technical support at
Contact
Sales Desk: Phone:
Information Hours: 8:00 . to 5:00 IM. Pacific
E-mail:
Post: Sierra Wireless
13811 Wireless Way
Richmond, BC
Canada V6V 3A4
Fax:
Web:
Consult our website for up-to-date product descriptions,
documentation, application notes, firmware upgrades, trouble-
shooting tips, and press releases:
Rev 1.7 Oct 08 9
EFTA00730177
Watcher for Mac Help
SIERRA WIRELESS
AAAAA OP rote wt cccccc mAentwre
C) 2008 Sierra Wireless. All rights reserved.
AirCard® and Heart of the Wireless Machine® are registered trademarks of Sierra
Wireless. Watcher® is a trademark of Sierra Wireless, registered in the European
Community.
Sierra Wireless, the Sierra Wireless logo, the red wave design, the red-tipped antenna,
and TRU-Install are trademarks of Sierra Wireless.
Mac OS® is a trademark of Apple Inc., registered in the US and other countries.
Other trademarks are the property of the respective owners.
10 2130853
EFTA00730178
ℹ️ Document Details
SHA-256
87d0e88e812fa9576b32ef0401a46f10c19dcf3d4a0a4d6b64baea25a58a7dea
Bates Number
EFTA00730169
Dataset
DataSet-9
Document Type
document
Pages
10
Comments 0