EFTA02644947.pdf

From: Eric Roth Sent: Monday, June 26, 2017 8:23 PM To: Jeffrey E. Cc: Richard Kahn Subject: G550 Divan arm rests are currently 6.125"= I am thinking they should be 8.00" wide. We are creatin= a mockup right now to get a better visual for complete conviction or alteration. </=pan> The wood veneer below is a sample with NO=Stain and NO finish — it is just raw. Maybe anodize the handle=to blend in with the wood (like the hinges on the sidewall tables)? Maybe we could fabricate a new handle from mahogany? What a=e your thoughts? <=span> Removing and modifying the aft upper gall=y is a really big deal. There is a phone in the fwd upper section, a=110vAC outlet above the countertop and the hutch lighting. Once tis upper is removed, there will be holes in the counter top as well =s the aft bulkhead. There may also be UVA discoloration in the footp=int of the bulkhead veneer where the hutch was mounted. The main cabin upp=r valance / PSU and handrail need to modified and/or extended depending on where we break the division between =abin and galley. Many peripheral panels need to be removed to gain a=cess to the area. This can't be done during this phas= / down time. <=span> EFTA_R1_01880928 EFTA02644947 Best Regards, Eric ERIC H. ROTH<=> I PRESIDENT I www.intljet.=om <http://www.intljet.com/> <http://twitter.com/#!/intljet> <http://www.facebook.com/intljet> 2 EFTA_R1_01880929 EFTA02644948 2221S=ithtown Avenue, Long Island MacArthur Airport, Ronkonkoma, New York 11779<=:p> 3 EFTA_R1_01880930 EFTA02644949