EFTA02713379.pdf

From: Richard Kahn Sent: Wednesday, June 24, 2015 5:38 PM To: Jeffrey E. Subject: Fwd: Dock Fenders Attachments: SHBRK Scann15062315370.pdf, Untitled attachment 00256.htm Richard Kahn HBRK Associates Inc. 575 Lexington =venue 4th Floor New York, NY 10022 tel =12-971-1306 fax cell Begin forwarded message: From: =/b>Richard Kahn Subject: =/b>Dock =enders Date: =/b>June 23, 2015 at 3:44:00 PM =DT To: =/b>"jeffrey E." <[email protected]> Layout Attached =re 5 layout options for dock fenders in addition to our current =ayout Options =-3 are three rows of 6' fenders Carlos =easured to cover entire dock we would need 693 feet which comes to 116 =6' pieces) Options 4 & 5 are two rows of 6' =enders Carlos measured to cover entire dock we =ould need 462 feet which comes to 77 (6' pieces) Note 500 feet is minimum order therefore we =ill need to order 84 pieces Carlos has sample on LSJ in dark grey =olor which you said was correct color If you are not satisfied with any of =he above layouts please advise on alternate configuration EFTA_R1_02135111 EFTA02713379  Fender Holes Regarding Holes in Fenders i also outlined two =ptions Option A - Screws will be 1.5 feet apart Option B - Screws will be 1foot apart The Back Hole would be 1/2" =nd Front Hole will be 1.5" Timing Production will take 3 weeks and then another 1 week for =hipping Projected arrival on STT is July =0 Installation Carlos said that with =amon and Hernando installation will take approximately 1 week Projected Costs Options 1-3 (three rows =f fenders) Color - Dark Grey # 11181 13.44 = 693 feet = 9,314.92 Vendor Hole =rilling (1drilling cost per hole x 116 pieces x 3 holes) = 348.00 =/span> Stainless Steel Threaded Rods & Bolts =estimated 116 pieces x 3 screws per piece x 12.00) =/span>4,176.00 =/span> Tropical Shipping = = 1,500.00 Miscellaneous Tools =drill bits, etc) = 661.08 Total Cost with =hree rows of fenders = =nbsp;16,000.00 Options 4 & 5 (two =ows of fenders) Color - Dark Grey # 11181 =/span> 13.44 x 500 feet = 6,720.00 Vendor Hole Drilling (1 drilling cost per hole x 84 pieces x = holes) = 252.00 =/span> Stainless Steel Threaded Rods & Bolts =estimated 84 pieces x 3 screws per piece x 12.00) =/span>3,024.00 Tropical Shipping = =/span>1,500.00 Miscellaneous Tools (drill bits, =tc) = =/span> 504.00 Total Cost with three rows of fenders = =nbsp; 12,000.00 Please advise on which Option you would like in addition to =umber of holes per piece (3 or 4) http://www.zoro.com/value-brand-threaded-rod-plain-12-10x3-ft- l=01201003pIdar/i/G1605527/?utm_source=google_shopping&utm_medium=c=c&utm_campaign=Google_Shopping_F eed&gclid=CjwKEAjwh6SsBRCYrKH=7J3NjicSJACUxAh7poTcc2K3zsySvFqwmGl2K3TUQ52UwvFjuxcOO- Lh5hoCFKnw_wcB&=clsrc=aw.ds 2 EFTA_R1_02135112 EFTA02713380  http://technorubberindustries.com/techno.pdf Richard Kahn HBRK Associates Inc. 575 Lexington =venue 4th Floor New York, NY 10022 tel =12-971-1306 fax 646-350-0954 cell c=blockquote> 3 EFTA_R1_02135113 EFTA02713381