EFTA02707268.pdf

US 2300 is a woven filtration geotextile made of 100% hightenacity polypropylene yarns. It is a 'combination" product made of monofilament yarns in the machine direction and fibrillated yarns in the cross &talon. US 230C resists ultraviolet and tidogical deterioration. rotting, naturally encountered basics and acids Polypropylene is stable within a pH ranged 2 to 13. US 230C meets the following M.A.R.V. values )5. Wks, PV"*. **et, q.orl:,* si t amI. L...." Gentaxdo Separator Sul:wane PROPERTY TEST METHOD ENGLISH METRIC Tensile Strength ASTM 0-4632 315 X 315 lbs 1,400 x 1,400 N Elongation @ Break ASTM D-4632 15 x 15% 15 x 15% Wide Width Tensile ASTM 04595 2.400 x 2,400 lbs/ft (200 x 200 lbs/in) 35 x 35 kN/m Wide Width Elongation ASTM D-4595 12 x 8% 12 x 8% Wide Width Tensile @ 5% Strain ASTM 0-4595 774 x 1,404 lbs/ft 10.8 x 20.5 kN/m Mullen Burst• ASTM 0-3786• 800 psi 5,510 kPa Puncture Strength' ASTM D-4833' 140 lbs 622 N CBR Puncture ASTM D-6241 1,400 lbs/ft 20 kN/m Trapezoidal Tear ASTM 0-4533 125 x 125 lbs 556 x 556 N Apparent Opening Size ASTM 04751 40 US Sieve .425 mm Permittivity ASTM I3.4491 .70 Sec-1 .70 Sec -1 Water Flow Rate ASTM D-4491 50 g/min/sf 2.035 l/m intsf UV Resistance @ 500 Hours ASTM 04355 80% 80% ROLL SIZE AREA WEIGHT 15' x 300' 500 sys 265 lbs • Historical averages (current values not availablel: Hullers Burst Strength ASTI 03186 is no longer recognized by *5714 0-3 on Geosynthetics as an acceptable test method. Puncture Strength Asni :24833 is not recognized by Ammo M28$ and has been replaced ulth CBR Puncture MIX D6241. This infonnation is pnwided for refortice only and is not intended as a %banality or guarantee US Fabrics assumes no liability in connection with the use of this infonnation (I/20I3). US Fabrics. Inc. 13904 Virginia Avenue I Cincinnati, OH 45227 (USA) I Phone:800-518.2290 I Fax: (513) 271.4420 EFTA_R1_02104640 EFTA02707268