EFTA02414570.pdf

To: Jeffrey [email protected]] From: Al seckel Sent: Sun 11/7/2010 1:51:59 PM Subject: Fw: FreeConferenceCall Account Registration This is to record your interviews. It is now all set up. Forwarded Message ---- From: FreeConferenceCall Services <[email protected]> To: Sent: Sun, November 7, 2010 5:49:54 AM Subject: FreeConferenceCall Account Registration Thank you for signing up with FreeConferenceCall A 96 caller reservabonless conference call account with free recording has been activated for you at FreeConferenceCall.com. You can now conduct telephone conference calls anytime without a reservation, plus you have the added benefit of recording your conference calls for free! Click here to access your account online; have your dial in number, access code and subscriber pin ready found under Account Information below. If you have any questions email us at servicestfreeconferencecall.com or call us toll-free at 877-482-5838. Account Information Instructions Name: Al Seckel When using your free live conference call number Email: you must notify your callers by giving them the date, time, dial-in number and access code. All parties will Free Conference Call use the same dial-in number and enter the same Conference Dial-in Number: (559) 546-1000 access code, followed by the x or * key as specified Host Access Code: 427184' below. Participant Access Code: 427184* Host: When prompted, enter the assigned access Free Conference Recording code, followed by the key. Subscnter PIN code: 273121A To start recording, host hits: '9, then the PIN Participant: When prompted, enter the assigned To stop recording, host hits: '9 access code, followed by the A key. Once connected to the live conference, every caller Free Conference Play Back will be able to talk. Every caller will also have access Playback Number: (559) 546.1099 to the touch tone commands listed below. Access Code: 427184A Recording Instructions During the free live conference, the host can start Note: You will be notified of any changes to your account via email. recording at any time by pressing '9. The system disconnects him/her from the free live conference Issue date: November 7 2010 1:49:54 PM. and prompts for the Subscriber PIN. If the Subscriber PIN is valid, the host is returned to the conference and all attendees are notified that the recording option has been started. To stop and save the recording, the host will press '9 again. Play Back Instructions To listen to the recorded conference, the host must provide attendees with the play back number and access code. Please note, that the playback number is different from the conference dial-in number. When users call into the recording playback number, they will be prompted to enter the access code and then enter the reference number for a specific recording. The reference number for each recording is provided on your Call Detail Report after the conference call is complete and on yOur recordings EFTA_R1_01477549 EFTA02414570  page in your account. Once confirmed, the system will play back the recorded conference. During play back, the user can scroll forward or backwards through the recorded conference. You will find the play back features below. Click he/ e for further Instructions on how to access recorded conferences on your playback number. Features by Caller To access the different Feature Keys when in a call, simply press the corresponding keys below - it is required that a caller enters a star (') key before the desired feature key. Participant Feature Keys Touch Tone Command Explanations Caller count - *2 key (Host only) Mows the host to get a count of how many callers are on Exit - exit the call the code. Exit conference - '3 key z - conference instructions Pressing *3 Takes the individual user out of the conference call and back into the lobby. Instructions - *4 key Plays a menu of touch tone commands. Mute/Unmute - caller controlled muting Listening modes - •5 key (Host only) N7 There are 3 different listening modes for the audience - the default mode is open conversation - pressing '5 once will mute the audience however the audience can un- mute them selves by pressing '6 for questions or guest Host Feature Keys(Accessed by following the Access speakers - pressing • 5 again will put the audience into Code with a * instead of a #) mute mode with out the capability of un-muting themselves - press *5 again and it will return you to open conversation mode. Count - plays the number of parties in the call Mute - *6 key Pressing •6 will mute the line of the individual caller - pressing •6 again will un-mute the line. Exit - exit the conference call Security -'7 key (Host only) Pressing •7 will secure the conference and block all other -,.. callers attempting to enter the conference - pressing '7 again will re-open the conference to all caller joining. Instructions - conference instructions Tone control -'8 key (Host only) The default setting is Entry and Exit tones on - pressing *8 once and you will hear entry and exit tones off, press *8 again and you will hear Entry tone off exit tone on, press '8 again and you will hear entry tone on exit tone, -..-- - Listen only modes - host controlled muting pressing '8 one more time will put you back in default mode with both exit and entry tones on. Record Conference - *9 key (Host only) Pressing '9 once will disconnect the host from the N,. Mute/Unmute - caller controlled muting conference and prompt for the Subscriber PIN. When the Subscriber PIN is validated, the host is returned to the conference and an announcement is made to the attendees that the conference is being recorded. To stop and save the recording, press 49 again. Secured/Unsecured - stops callers from entering EFTA_R1_01477550 EFTA02414571  Tone controls Record Conference Playback Feature Keys Rewind 30 seconds Fast forward 30 seconds Pause/resume playback EFTA_R1_01477551 EFTA02414572