EFTA00964718
EFTA00964719 DataSet-9
EFTA00964723

EFTA00964719.pdf

DataSet-9 4 pages 970 words document
P17 V16 V11 V15 P19
Open PDF directly ↗ View extracted text
👁 1 💬 0
📄 Extracted Text (970 words)
From: Jeffrey Epstein <[email protected]> To: Larry Visoski Subject: Re: LSJ line array speakers Date: Sat, 06 Jul 2013 15:06:20 +0000 yes On Sat, Jul 6, 2013 at 9:14 AM, Larry Visoski <la> wrote: Jeffrey, My research found this line of outdoor, water/resistant speakers. These are Line Array outdoor deign, however its recommended the speakers should be protected from elements, Guitar Center carries this line, i will obtain pricing if you think this is speaker system you are thinking? Web link. Do you like this deign ? Thx, Larry Products I Loudspeakers I Line Array Systems WLWX Weatherized WideLine Systems WideLine-wx models are constructed using premium birch plywood which is full encapsulated in fiberglass. The input connector plate is replaced by a hardwired, captive, UV resistant, outdoor-rated (direct burial) cable with a gland-nut through the cabinet for waterproofing. The cable will be 3 meters in length unless otherwise specified at the time the order is placed. Grilles are stainless steel covered in outdoor rated, vinyl coating and lined with acoustic foam and a fine woven stainless steel mesh. WideLine WX models are strictly built to order. Please allow 90 days plus shipping time from the time the M. is delivered to QSC for delivery. WL2102-wx The WL2102-wx is a weather resistant, installation version of the WideLine-10 WL2102-w line array. All rigging hardware is removed and replaced with four female M10 fittings (eight total) mounted to either end of the enclosure. The loudspeaker is designed for 3-way operation only and no handles are provided. An adjustable, external, bolt-on rigging system for box-to-box connection and adjustment of splay angles is included. The AF2102-wx is a compatible, aluminum array frame for use when suspending the WL2102-wx. Array frames for the standard WL2102-w are not compatible with the WL2102-wx. WL3082-wx EFTA00964719 The WL3082-wx is a weather resistant, installation version of the WideLine-8 WL3082 line array. All rigging hardware is removed and replaced with four female MI0 fittings (eight total) mounted to either end of the enclosure. The loudspeaker is designed for 3-way operation only. An adjustable, external, bolt-on rigging system for box-to-box connection and adjustment of splay angles is included. The AF3082-wx is a compatible, aluminum array frame for use when suspending the WL3082-wx. Array frames for the standard WL3802 are WL2102-wx WL3082-wx not compatible with the WL3082-wx. GP218-wx The GP218-wx is a weather resistant, installation version of the WideLine- 10 GP218 subwoofer. The standard version includes no suspension provisions but MI 0 suspension points may be added on request. GP218-wx Weatherized WideLine SPECIFICATIONS WL2102-wx WL3082-wx GP218-wx System Type Tri-amp line array Tri-amp line array 2 x 18" vented element element subwoofer Transducers High-frequency 3" titanium 3" titanium diaphragm, diaphragm, Low-frequency neodymium magnet neodymium magnet 2 x 18" transducers, 2 x 10" transducer, Dual, 8" woofer, 4" voice coil, ceramic 3" voice coil, ferrite 2.5" voice coil magnet magnet Frequency Response 55 Hz - 18 kHz 68 Hz- 18 kHz 31.4 Hz - 240 Hz (±3 dB) (without processing) Frequency Range 48 Hz - 20 kHz 62 Hz - 20 kHz 27.4 Hz - 1.2 kHz (-10 dB) (without processing) Continuous Power HF: 80 W HF: 85 W Capacity I LF/MF: 600 W LF/MF: 250 W LF: 1700 W Peak Output 2 HF: 127 dB HF: 122 dB LF: 133 dB LF: 128 dB LF: 140.7 dB Nominal Coverage H: 140° H: 140° V: dependent on V: dependent on EFTA00964720 number of elements number of elements used used Input Connectors Tinned, bare wire Tinned, bare wire Tinned, bare wire Suspension / Integral rigging Integral rigging None (M10 points Attachment Points system, vertical splay system, vertical available by request) adjustable splay adjustable in 1° increments in 1° increments from 0°-10° from 0°-10° Weight (Net) 92.5 lb (42 kg) 61 lb (27.7 kg) 215 lb (97.5 kg) Dimensions (HWD) 11.75" x 27.25" x 21.13" x 30.13" x 9.5" x 20" x 15.5" 18.5" 47.32" 241 rmn x 508 mm 298 mm x 692 mm x 537 mm x 765 mm x 394 mm 470 mm 1202 mm 2 Continuous IEC specified test signal, 2 hours bi-amp mode unless otherwise stated. 2 Calculated at I m using power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed. Specifications subject to change without notice. LINE ARRAY SYSTEMS ILA Installation Line Array WideLine-10 WideLine-8 Weatherized WideLine Systems DOCUMENTS User Manual (PDF-952KB) RELATED PRODUCTS WideLine-I0 Line Array_System WideLine-8 Line Array_System GP218-sw Subwoofer WL218-sw WideLine Subwoofer SC28 System Controller QSControl net BASIS IMPORTANT NOTE: Signal Processing Requirements Like most line-array systems available today, QSC WideLine EFTA00964721 and ILA line-arrays require carefully optimized signal processing in order to perform as intended. QSC has developed processing settings for these loudspeaker systems using our SC28, BASIS and Q-Sys digital processing devices. Arriving at these settings requires skilled engineers, sophisticated measurement equipment and repeated listening in various environments. It is not possible to simply take the parameters from a QSC processor, transfer them to another processor and get the same results. Other processor manufacturers use different algorithms and design techniques that will produce a different transfer function even if the settings are substantially the same. As a result, QSC is unable to provide settings or tuning support for our line array systems when used with any processors other than those specified by QSC. Sent from my iPad The information contained in this communication is confidential, may be attorney-client privileged, may constitute inside information, and is intended only for the use of the addressee. It is the property of Jeffrey Epstein Unauthorized use, disclosure or copying of this communication or any part thereof is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by return e-mail or by e-mail to [email protected], and destroy this communication and all copies thereof, including all attachments. copyright -all rights reserved EFTA00964722
ℹ️ Document Details
SHA-256
e3da83ba51f72c4cd2dea52da8ce4d991a0a705e1bec4d872c329e0a3a0044ad
Bates Number
EFTA00964719
Dataset
DataSet-9
Document Type
document
Pages
4

Comments 0

Loading comments…
Link copied!