EFTA01223741.pdf

SOFTWARE HOUSE C•CURE 9000 SiteServer Quick Setup Guide What's in the Box? Connections Note: C•CURE 9000 is pre-installed on the appliance. C-CLIfIC it.O0 stesever The SiteServer Software Recovery USB should be kept in a safe place. The serial number printed on the label is your proof of license to use the software. The label is located on the bottom of C•CURE 9000 SiteServer Appliance the SiteServer appliance. This will be required if you need to • Quick Setup Guide • Regulatory Document recover your system. • Release Notes • Keyboard & Mouse • Wall Mounting Kit • Reset Pin Required Accessories (Not in the box) VGA or DVI-I LAN 2 Power Keyboard & Mouse • Localized Power Cord • Software Recovery USB Drive Monitor • Flat Panel Monitor • Network Cables • VGAJDVI Cable • Software House recommends using an Uninterruptible Power Supply (UPS). • Power up the monitor and peripherals before the unit. Recommendations 0 • Be sure to use surge protection for the power supply and provide appropriate grounding. O a) Connect the SiteServer and hardware to the network using LAN 1. Optionally, LAN 2 can be used as a Please wait until Startup Wizard loads. b) Read and agree to the End User License Agreement (EULA). - Select Save and Next. d) Edit the Computer Name and Time - Select to monitor intrusion driver health status. - Select Save and Next. secondary network port. Refer to the C•CURE 9000 - Click Save and Next. SiteServer Configuration Guide for more information. Zone if required. g) Activate the temporary license (and begin 60- C) SiteServer checks if a DHCP Server is day trial), select Activate Temporary License. b) Press the pin hole button on the front of present on LAN #1. If you are using a - Select Save and Next. No applications will function until the temporary 1RE MOUSE DHCP server to an assign IP address, license has been activated. the unit using the Reset Pin to power up e) Configure a Database Backup the unit. leave the DHCP checkbox checked. - Select Complete. location. To Assign a Static IP Address: The SiteServer restarts. If required, create a Backup Event & - Enter the SiteServer IP address. See the C•CURE 9000 SiteServer Configuration A series of boot messages appear and the Schedule and/or a Sample Database by a) Select your preferred language and (Do not edit pre-populated digits) Guide for information on generating a permanent system loads. checking appropriate checkbox. click Save and Next. - Complete the Subnet Mask. license file request and registering the SiteServer. - If required, enter the Default Gateway - Select Save and Next. English is the default selection. If and Primary DNS. Note: You must register the SiteServer and get a another language is selected, a restart permanent license before the 60-day temporary will be required. Note: LAN #2 can be used as a secondary f) Configure Advanced Settings. network port, see the C•CURE 9000 - Enable or disable the Toolbar and license expires. SiteServer Configuration Guide for more Health Dashboard. information. Documentation ° Open the Server Configuration from the °To open the C•CURE 9000 Administration ° To open the C•CURE 9000 Monitoring The C•CURE 9000 Software English manuals in PDF format are When the SiteServer Workstation from the desktop, click desktop, click Station from the desktop, click located in the CADocuments folder. restarts, log in as Administrator (password: The translated C•CURE 9000 software manuals for the supported 'Administrator') to languages in PDF format are located on the USB drive in display the desktop. Note: it may take several seconds for a SiteServerBootImagelSiteServer2-Upgrade-InstallenLanguagePack. Service to appear as 'Stopped" before you Configure Access Control Hardware and All configured Access Control devices can enable. Software (for example, set up iSTAR clusters will be available for Monitoring. Note: The password is and controllers, personnel, events, etc.). case-sensitive. Enable and Start driver services for the hardware connected to your SiteServer (for example,'Software House iSTAR Driver @ 2016 Tyco Security Products. All Rights Reserved Service', etc.). 8200-1082-01 DO EFTA01223741