EFTA00594721.pdf

DriveCore Install Analog Series The new DriveCore", Install series amplifiers is a complete line of high performance installation amplifiers based on Crown's proprietary DriveCore technology. ( nrl 1300 Two-channel, 300W 0 4Q Analog Power Amplifier, 70V/100V compare -Gee-\\-ia .1)Ci 21600 (htt4/ Two-channel, mow O 4O Analog Power Amplifier; 70V/100V EFTA00594721  2C131691/. Eight-channel, 600W O 4Q Analog Power Amplifier, 70V/100V compare 62 „ s• DCi 211250 Two-channel, 150W @ 4Q Analog Power Amplifier, 70V/100V compare ( DCi 411250 ( Four-channel, 1250W @ 4Q Analog Power Amplifier, 70V/100V compare Compare Selected Products Select 2 to 4 products to compare EFTA00594722 Product Comparison --- , La. 47— 0.2 )( St.0.05 pci 21600 (/en/oroducts/dci-2-600) pci 20 250 Ven/oroducts/dci-2-1250) Ven/prosLckcacitt®) (Ledproducts/dcl-2-1250) Two-channel, 600W @ 4Q Analog Power Two-channel, 1250W @ 4Q Analog Power Product type Amplifier; 70V/100V Amplifier, 70V/100V Frequency Response ( 8 +/- 0.25 dB +/- 0.25 dB Ohms, 20 Hz - 20 kHz) Signal To Noise Ratio (A- > 108 dB > 108 dB weighted) Total Harmonic Distortion (at full rated 0.35% 0.35% power, 20 Hz - 20 kHz) Voltage Gain 34 dB 34 dB Damping Factor (20 Hz >1000 >1500 to 100 Hz) Input Impedance (nominal 10 kOhms, 5 kOhms 10 kOhms, 5 kOhms balanced, unbalanced) Maximum Input Level +20 dBu +20 dBu before Compression Maximum Input Level +26 dBu +26 dBu before Clipping Load Impedance EFTA00594723  (Stereo/Dual 2 - 16 Ohms; 70Vrms and 100Vrms 2 - 16 Ohms; 70Vrms and 100Vm-is Mode) Load Impedance 4 - 16 Ohms; 140Vrms and 200Vrms 4 -16 Ohms; 140Vrms and 200Vrms Bridge Mono Continuously variable speed forced air, Continuously variable speed forced air, Cooling front to back airflow front to back airflow Maximum Fan Noise (re dBA 45 45 SPL @ 1M) Required AC Mains (+/- 100V-240V - 50/60 Hz 100V-240V - 50/60 Hz 10%) HARMAN PROFEBSIONAL At LP\ illeatimaga All Rights Reserved. EFTA00594724