EFTA01071646.pdf

SIEMENS Industry, Inc. SERVICE PROPOSAL No.: 1101051C > 9 East 71' street Date: January 28, 2011 > New York, New York 10021 Limiting Date: 30 Days > Attn: Rich Barnet Project Design of a custom application for Apple IPAD Proposal Siemens Industry will design and install a custom interface using a Crestron Application on the IPAD and Siemens Modbus drive to push date from the existing Building Automation system to Apple IPAD. Investment: $34,252.00 (Thirty Four Thousand Two Hundred Fifty Two Dollars) Plus tax 7 Wiring by Siemens ri Wiring by others n No wiring required Terms of Payment: n Monthly Progress Payments • No Retainage • % in Advance ri Net 30 From Invoice The Terms and Conditions of Sale shown on reverse are a part hereof We do not include Consequential and Indirect Damages Proposal Accepted: Proposal Submitted: Siemens Industry. Inc. is authorized to proceed with Siemens Industry, Inc. the work as proposed. Purchaser By Bradley Rickert By Title Sr. Service Sales Engineer Title Date January 28, 2011 Date Siemens Industry. Inc 19 Chapin Road. Bldg. B-200 Pine Book. NJ 07058 Telephone (973) 3964142 Fax (973) 575.7968 © Siemens Industry. Inc. EFTA01071646 SIEMENS Building Technologies TERMS AND CONDITIONS OF SALE (Service Sales) By accepting this proposal. Purchaser agrees to be bound by the following terms and conditions: I. SCOPE OF WORK This proposal is based upon straight time labor and excludes all plastering. patching and painting. Any request by the Purchaser for overtime work shall be considered an extra. In line devices such as valves. dampers, humidifiers. immersion wells (separable sockets). pressure taps. liquid flow switches. orifice plates. orifice flanges. etc.. Mich may 0e furnished hereunder shall be distributed and installed by others under Landis 8 Steele. Inc. (hereinafter called "Sallee) supervision and al no additional cost to Seller. Purchaser agrees to provide Seller with requied field utilities (electricity. toilets. drinking water. project hoist and elevator service. etc.) Seller agrees at all times to keep the job site clean of debris arising out of its own operations. and Purchaser shall in no event tackcharge Seller for Purchaser's cleanup costs without Seller's written consent. 2. REMITTANCES All invoices shall be due and payable in United States currency. free of exchange. collection, or any other charges. upon receipt or as otherwise agreed upon and set forth in writing by Seller. The Purchaser. it so requested agrees to fumish Seller with all information including financial statements. necessary to make proper credit appraisal. Refusal to supply such information may cause this proposal to 0e withdrawn. Terms of payment originally granted are subject to the approval of continued credit status. Prices are subject to correction for error. 3. PAYMENTS Seller reserves the right to render invoices from time to time as the work progresses. which shall be due and payable as provided in the paragraph entitled 'Remittance'. If the Purchaser becomes overdue in any progress payment. including retention. Seller shal be entitled to suspend work. entitled to interest al the annual rate of 18% or the maximum rate permitted by the laws of the State of Illinois. and/or avail itself of other legal remedies. 4. If the materials or equipment ricluded in this proposal become temporarily or permanently unavailable for reasons beyond the control and without the fault of Seler. then ri the case of such temporary a-availability. the time for performance of the work shall be extended to the extent thereof. and in the case of permanent unavailability. Seller shall (a) be excused from furnishing said materials or equipment. and (0) be reimbursed for the difference between the cost of the materials or equipment permanently unavailable and cost of a reasonably available substitute therfor. 5. MATERIALS Seller will immediately undertake to purchase the materials required by the contract and will suitable inure and store the materials on the job site or al other storage facilities. Purchaser agrees to pay for said materials when delivered to the job site or other storage facilities and to pay for the cost of insurance and the cost of storage for said materials. 6. WARRANTY Seller warrants that the equipment furnished by it shall be free from defects in material and workmanship arising from normal usage for a period of one (1) year from deWery of said equipment. or if installed by Seller for a period of one (1) year from installation. For equipment installed by Seller. if Purchaser provides written notice to Seller of any such defect within thirty (30) days after the appearance or discovery of such defect Seller shall. at its option. promptly repay or replace the defective equipment. For equipment not installed by Seller. if Purchaser returns the defective equipment to Seller within thirty (30) days after appearance or discovery of such defect. Seller shall. at its option. promptly repair or replace the defective equipment and retum said equipment to Purchaser. All transportation charges ricurred in connection with the warranty for equipment not instated by Seller shall 0e bome by Purchaser. THESE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES. EXPRESS OR IMPLIED. INCLUDING. BUT NOT LIMITED TO. THOSE OF MERCHANTABILITY AND FITNESS FOR A SPECIFIC PURPOSE. Seler assumes no responsibility for repairs made on Sellers equipment unless done by Seller's authorized personnel. or by written authority from Seller. Seller makes no guarantee with respect to material not manufactured by it. 7. PURCHASER'S REMEDIES The Purchasers remedies with respect to equipment found to be defective n material or workmanship shall be limited exclusively to the right of repair or replacement of such defective equipment. IN NO EVENT SHALL SELLER BE LIABLE FOR CLAIMS (BASED UPON BREACH OF IMPLIED WARRANTY) FOR ANY OTHER DAMAGES. WHETHER DIRECT. IMMEDIATE. FORESEEABLE. CONSEQUENTIAL. OR SPECIAL OR FOR ANY EXPENSES INCURRED BY REASON OF THE USE OR MISUSE OF EQUIPMENT WHICH DOES OR DOES NOT CONFORM TO THE TERMS AND CONDITIONS OF ANY CONTRACT RESULTING FROM THIS PROPOSAL. 8. TAXES The amount of any future sales. use. occupancy. excise, or other tax. federal. state. or local which Seller hereafter shad 0e obligated legally to pay. either on its own behalf or on behalf of the Purchaser or otherwise, with respect to the material covered by this proposal, shall be added to such prices and paid by the Purchaser. 9. LOSS. DAMAGE OR DELAYS Seller shall not be liable for any loss, delay. injury or damage that may be caused by circumstances beyond its control including. but not restricted to acts of God. war. civil commotion. acts of government, fire. theft, corrosion. floods. freeze-ws. strikes. lockouts. differences with workmen. riots. explosions, quarantine restrictions. delays in transportation. shortage of vehicles. fuel. labor or materials. or malicious mischief. IN NO EVENT SHALL SELLER BE LIABLE FOR BUSINESS INTERRUPTION LOSSES OR CONSEQUENTIAL OR SPECULATIVE DAMAGES. Out this sentence shall not relieve Seller of lability for damage to property or injury to persons resulting from accidents caused directly by the negligence of Seller in performance or failure of performance of its obligations under this agreement. 10. GOVERNING LAW Any contract resulting from this proposal shall 0e governed by. construed, and enforced in accordance with the laws of the State of Illinois. 11. PATENT INFRINGEMENT Seller will hold its Purchaser and the Owner harmless from infringement of any United States patent covering equipment of its manufacture. This, of necessity. is limited to the equipment per se and cannot be extended to applications of such equipment in a system, except ri writing by an officer of Seller. The Purchaser and Owner shall advise Seller immediately in the event any claims of infringement are brought to their attention. 12. ACCEPTANCE OF TERMS This proposal shall become a bindng contract between the Purchaser and Seller when accepted in writing by the Purchaser. Such acceptance shal be with the mutual understanding that the terms and conditions of this proposal are a part thereof with the same effect as though signed by both parties named here., and shall prevail over any inconsistent provision of said order. No waiver, alteration or modification of the terms and conditions on this and the lace side hereof shall be birling unless witting and signed by an authorized representative of Seller. t3. ATTORNEYS' FEES Purchaser agrees that he will pay and reimburse Seler for any and all reasonable attorneys fees which are incurred by Seller in the collection of amounts dueand payable hereunder. 14. CANCELLATION AND SUSPENSION Any contract resulting from this proposal is subject to cancellation or instructions to suspend work only upon agreement to pay Selers adjustment charge. EFTA01071647  Technical Specification Sheet SIEMENS Document No. 127-1649 May 13, 2010 Systems Integration Modbus Driver on the PXC Modular Platform Insight Workstation Management Level Network (BACnet IP) PXC Modular with Furnware Revision 3.1 and Later (BACnet MS,TP) • Driver Installed in PXC Modular PXC Modular T Automation Level Network AND OR RS-485 Equipment below this line typically supplied and installed by others. OR (Modbus RTU) (P1 Network) Digital Room Sensor RS.485 RS-485 bunk TninkfRS-422 Interlace II • Interlace RS-485 MUL11DROP I RS-232 RS-422 RS-422 MULTIDROP Lab Room Controller Modbus Slave Modbus Slave Modbus Slave Device Device Device VFD (0 th r Modbus Slave Devices (h r Modbus Slave Dev ces) System Arch Lecture-Modbus Pilaster on the PXC Modular Platform (Firmware 3.4 Siemens Industry. Inc. Page I of 5 EFTA01071648  Insight' Workstation Management Level Network Automation Level Network Equipment below this tine typically supplied and installed by others. I OR (Modbus RTU) Digital Room Senior RS-485 I 7 -485 RS-485 Trunk TrunfoRS-422 Interlace • • Interface I - 4 Lab Room RS-232 RS-422 Controller RS-485 MULTIDROP RS-922 MULTIDROP Modbus Slave Modbu Slave Modbus Slave Device Device Device (Other Modbus Slave Devices (Oth r Modbus Slave Devices) System Architecture—Modbus Master on the PXC Modular Platform (Firmware 2.4 Page 2 at 5 Siemens Industry. Inc. EFTA01071649  (TCPAP or BACnet/IP) Insights Management Workstation Level Network (RS-485) HDriver Installed Driver Installed In Automation PXC Modular PXC Modular Level Network OR R8-485 Equipment below this line typically supplied and installed by others. RS-485 Trunk Interlace * • RS-232 Third-party Workstation (Modbus Master) System Architecture—Modbus RTU Slave (RS-485 or Ethernet TCP/1P ALN). Siemens Industry. Inc. Page 3 of 5 EFTA01071650  (TCP/IP or BACnet/IP) (Modbus TCP or Insight - Modbus RTU Over Ethernet) Management Workstation ■ Level Network --I Driver I stalled In I-- Automation PXC Modular Level Network dr Equipment below this line typically T supplied and Installed by others. Modb s RTU RS-485 Modb s TCP Over Ethernet FLN 1,2, and/or 3 Server Device OR (Modbus RTU) (P1 Network) Digital --4;t: Room Sensor RS-485 I R1S-485 RS-485 TEC Trunk Trunk/RS-422 Interface II r Interface FT Lab Room RS-232 RS-422 Controller RS.485 MULTICROP R5-422 MULTIDROP Modbus Slave odbus Slave Modbus Slave Device De lee Device rrni VFD (0 th r Modbus Slave Dev ces) (Oth r Modbus Slave Dev ces) System Archite ture—Modbus TCP Client and Modbus RTU over Ethernet (Ethernet TCP/IP ALN). Notes on System Architecture Functionality The Modbus Driver provides communication between The Modbus Driver can be loaded into PXC Modular the APOGEES Automation System and Modbus hardware. The driver is a microprocessor-based, devices. multitasking platform designed for multi-system communication and control. The Modbus Driver In addition, when configured in the Modbus RTU communicates with Insight® software, other APOGEE Master mode, the driver can support APOGEE P1 field panels and controllers, and Modbus devices. devices. Through the Insight® workstation, the Modbus points The Modbus Driver supports the following: can be monitored and commanded. The Modbus • 3 physical FLNs (1 through 3) can be used for points integrated into the APOGEE Automation connecting and addressing either Modbus RTU or System can be accessed by system applications such P1 devices on RS-485 FLNs. as Powers Process Control Language (PPCL), scheduling, trending, and alarming. • 95 virtual FLNs (6 through 100) for mapping devices through an Ethernet TCP/IP ALN. The Modbus Driver will not affect, in any way, the operating sequence or safeties as factory programmed • Up to 247 device addresses per FLN. into Modbus devices. • Maximum of 8000 points per driver. Page 4 o15 Siemens Industry. Inc. EFTA01071651 Keys to Success Ordering Information Ensure that all Modbus equipment to be integrated is Hardware Description Product Number supported by the Modbus Driver. PXC Modular. Ethernet/IP or RS- PXC00-PE96.A 485 ALN, P1 FLN. PXX-485.3 is Benefits also required as the connection to the FLN devices. Systems integration brings the powerful facility control PXC Modular. BACnet/IP or PXC00-L96.A capabilities of the APOGEE Automation System MS/TP ALN, P1 or MS/TP FLN. together with Modbus devices. Integrating the PXX-485.3 is also required as the Modbus points allows both systems to operate as a connection to the FLN devices. single system providing marked advantages in the following: PXC Modular. Ethernet/IP or RS- PXC100-PE96.A 485 ALN, P1 FLN, self-forming • Reduced operating and training costs. TX-I/O Island Bus. PXX-485.3 is • Increased employee productivity. also required as the connection to • Increased diagnostic capabilities to extend the FLN devices. equipment life. PXC Modular. BACnet/IP or PXC100-E96.A • Improved systems information and control. MS/TP ALN, P1 or MS/TP FLN. self-forming TX-I/O Island Bus. • Maximized energy savings. PXX-485.3 is also required as the connection to the FLN devices. Products Supported Provides FLN support for the PXC PXX-485.3 Modular. Includes three RS-485 Since Modbus is an extremely popular and well- P1 FLN connections or one supported protocol, many devices and control MS/TP FLN connection: maximum systems have Modbus available. of 96 devices supported. The Modbus Driver in Modbus RTU Master mode also supports APOGEE P1 Field Level Networks. License Description Product Number License to enable the Modbus LSM-INT-MDBS Driver For more information, visit www.buildingtechnologies.usa.siemens.com. Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improvements are introduced. APOGEE and Insight® are registered trademarks of Siemens Industry, Inc. Other product or company names mentioned herein may be the trademarks of their respective owners. 2010 Siemens Industry. Inc. Siemens Industry, Inc. Your feedback is important to us. If you have Document No. Building Technologies Division comments about this document lease send them Printed in the USA 1000 Deerfield Parkway to Page 5 of 5 Buffalo Grove, IL 60089-4513 U.S.A EFTA01071652