EFTA00797407.pdf

AC1.SaICTM FUEL TANK IGNITION MITIGATION MEANS For Boeing 737 NG Series - Supplemental Type Certificate No. ST02980NY For Boeing 737 CL Series - Supplemental Type Certificate No. ST03589NY FUEL TANK SAFETY AerSafe"". a fuel tank ignition mitigation means developed by AerSale". is one of the few Federal Aviation Administration (FM) approved options currently available that complies with the Fuel Tank Flammability Reduction (FTFR) rule. The FTFR rule requires fuel tank ignition sources and flammability exposure to be reduced in fuel tanks that are most at risk. With the FAA deadline fast approaching. Boeing 737 operators have two options: a flammability reduction means such as nitrogen inerting or an ignition mitigation means such as AerSafe. All affected passenger aircraft flying within or into the United States and operating under FAR Part 121must be manufactured to meet the FTFR rule or be retrofitted by December 26. 2017 to avoid being grounded. EFTA00797407  , /1//1/ ar r ;; C -- twitturfttutiii flit AerSafe- The AerSafe system limits the amount of available oxygen that can INSTALLATION ignite fuel vapors and prevents sparks from initiating an explosion. AerSale can perform AerSafe installation at any hangar around the It has been tested and developed to exact tolerances to fill the world and can also provide training for the installation. Installation cavity of the Boeing 737 NG and CL series center fuel tank. AerSafe can be done at the same time as a light maintenance check or comes as a complete prefabricated kit, and after initial installation, overnight after the aircraft center tank is de-fueled. AerSafe does the system is virtually maintenance-free. AerSafe provides an not require maintenance between heavy check visits or special economical solution with no mechanical parts that can fail, time- tooling to remove and install the parts. Aircraft can be modified or change components to replace, or flight test requirements after de-modified without any structural changes. installation. AerSafe also complies with the Notice of Prnnnsed Rulemaking (NPRM) No. FM-2016-6139. AerSafe Installation Kits Include: • All required materials ADVANTAGES AND BENEFITS • Installation instructions AerSafe AerSafe • Aircraft Maintenance Manual supplement B737 NG 8737 CL • Aircraft Flight Manual supplement Cost over 10 years (30,000 hrs) • License to use AerSafe on a single aircraft by serial number List Price $195,000 $149.500 Special Tooling for Installation n/a n/a DEADLINE Maintenance VCK/OET n/a n/a All affected passenger aircraft operating under 14 CFR Parts 121, Maintenance Ozone Converter and rya n/a 125, and 129 must be manufactured to meet the FTFR rule, or be Cleaning of NGS Air Separation Module Replacement n/a n/a retrofitted by December 26, 2017. The FTFR rule is detailed in the Total Cost $195,000 $149,500 FM Advisory Circular 120-98A. Lead Time Less than six (6) weeks Aircraft Downtime for Installation Two (2)days Mechanical/Electrical Parts None For more information about AerSafe, contact us at (305) 764-3227 or ABOUT AERSALE AerSale is a global leader in the supply of commercial aircraft, engines, and OEM (Original Equipment Manufacturer) used serviceable materials. Major clients include passenger and AerSale® cargo airline operators, leasing organizations, governmental entities, multinational OEMs, and independent MRO (Maintenance, Repair, and Overhaul) organizations. In addition, AerSale offers asset management services to owners with end-of-life aircraft and engine portfolios. Headquartered in Coral Gables, Florida, AerSale has various offices and operations in the United States, Europe, and Asia. 02017 AerSale. Inc. AerSale is a trademark of AeiSale. All fights reserved. EFTA00797408