EFTA00797405.pdf

AC1ISa1CTM FUEL TANK FLAMMABILITY REDUCTION SYSTEM For Boeing 737 NG Series FUEL TANK SAFETY AerSafe"", a fuel tank flammability reduction system developed by AerSafe". is one of the few Federal Aviation Administration (FM) approved ignition mitigation means currently available and complies with the Fuel Tank Flammability Reduction (FTFR) rule. The FTFR rule requires fuel tank ignition sources and flammability exposure to be reduced in fuel tanks that are most at risk. With the FAA deadline fast approaching. Boeing 737 operators have two options: a flammability reduction means such as nitrogen inerting or an ignition mitigation means such as AerSafe. All affected passenger aircraft flying within or into the United States and operating under FAR Part 121must be manufactured to meet the FTFR rule or be retrofitted by December 27. 2017 to avoid being grounded. EFTA00797405 AerSafeTM Supplemental Type Certificate No. ST02980NY The AerSafe system limits the amount of available oxygen that INSTALLATION can ignite fuel vapors and prevents sparks from initiating an AerSale can perform AerSafe Installation at any hangar around the explosion. It has been tested and developed to exact tolerances to world and can also provide training for the installation. Installation fill the cavity of the Boeing 737 NG series center fuel tank. AerSafe can be done at the same time as a light maintenance check or comes as a complete prefabricated kit, and after initial installation, overnight after the aircraft center tank is de-fueled. AerSafe does the system is virtually maintenance-free. AerSafe provides an not require maintenance between heavy check visits or special economical solution with no mechanical parts that can fail, time- tooling to remove and install the parts. Aircraft can be modified or change components to replace, or flight test requirements after de-modified without any structural changes. Installation. AerSafe also complies with the Notice Of Proposed Rulemaking (NPRM) No. FAA-2016-6139. AerSafe Installation Kits Include: • All required materials ADVANTAGES AND BENEFITS • Installation instructions Nitrogen • Aircraft Maintenance Manual supplement AerSafe Inerting • Aircraft Flight Manual supplement Cost over 10 years (30.000 his) • License to use AerSafe on a single aircraft by serial number List Price $318.000 Special Tooling for Installation $30.000 Maintenance MVO& $6.000 DEADLINE Maintenance Ozone Converter and n/a $150.000 All affected passenger aircraft operating under 14 CFR Parts 121, Cleaning of NGS Air Separation Module Replacement n/a $225.000 125, and 129 must be manufactured to meet the FTFR rule, or be Total Cost $195,000 a $729,000 retrofitted by December 27, 2017. The FTFR rule is detailed in the FM Advisory Circular 120-98A. Less han six (6) Lead Time One (1) year wteeks Aircraft Downtime for Installation Two (2) days 14 days Mechanical/Electrical Parts None Over 100 For more information about AerSafe. contact us at (305) 764-3227 or ABOUT AERSALE AerSale is a global leader in the supply of commercial aircraft, engines, and OEM (Original Equipment Manufacturer) used serviceable materials. Major clients include passenger and AerSale cargo airline operators, leasing organizations, governmental entities, multinational OEMs, and independent MRO (Maintenance, Repair, and Overhaul) organizations. In addition, AerSale offers asset management services to owners with end-of-life aircraft and engine portfolios. Headquartered in Coral Gables, Florida, AerSale has various offices and operations in the United States, Europe, and Asia. C. 2016 AerSale. Inc. AerSafe is a trademark of AerSale. All rights reserved. EFTA00797406